Terraco Terraroc FMR – 25Kg

Terraco Terraroc FMR – 25Kg, available from Al Tashteb Al Saree in Bu-Tina, Sharjah. Ask for price and stock on WhatsApp or call us.

WhatsApp usCall now

SKU: ATS-TER-B000026 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco Terraroc FMR is a grey, fibre-modified, shrinkage-compensated structural repair mortar for high-build concrete repairs on vertical and overhead surfaces, applied by hand or spray. This listing is the 25 kg bag. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terraroc FMR from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is Terraroc FMR?

Terraroc FMR is a pre-mixed structural repair mortar made from special cements, plasticisers, fibres and shrinkage-compensating additives. It is the high-build mortar in the Terraco concrete repair system, used to rebuild spalled and damaged concrete on columns, beams, slab soffits, walls and balcony edges. In single applications it builds up to 75 mm on vertical faces and 50 mm overhead, and it reaches 60 N/mm² compressive strength at 28 days.

Concrete damage in the UAE is often caused by corroding reinforcement: chlorides from coastal air and salty ground, and carbonation over time, make steel rust and expand, which cracks off the concrete cover. A proper repair cuts back to sound concrete, treats the steel, and rebuilds with a compatible, shrinkage-compensated mortar. The fibres in FMR improve crack resistance and help thick layers hold on vertical and overhead surfaces.

Technical data

TypeFibre-modified, shrinkage-compensated structural repair mortar
ColourGrey
Thickness per applicationMin 10 mm; max 75 mm vertical, 50 mm overhead
Mixing water5 L per 25 kg bag (20%)
YieldAbout 14 L of mortar per 25 kg bag
Consumption1.9 kg/m² per mm
Compressive strength50 N/mm² (7 days); 60 N/mm² (28 days)
Flexural strength (28 days)13 N/mm²
Tensile strength (28 days)6 N/mm²
Minimum application temperature5 °C
Packaging25 kg valve craft bags
Shelf life6 months unopened

How to repair concrete with Terraroc FMR

  1. Break out: remove all defective concrete back to sound material, and expose the reinforcement fully where it is corroded. Cut the repair edges square: Terraco says to avoid feather edging.
  2. Treat the steel: clean the reinforcement and coat it with Terraco Epiprime ZR.
  3. Prepare: wet the concrete thoroughly, then prime with Terrabond A.
  4. Mix: add a 25 kg bag to 5 litres of water and mix with a mechanical mixer for 3–5 minutes.
  5. Apply: trowel onto the primed surface and compact well, at least 10 mm thick, up to 75 mm vertically or 50 mm overhead per application. For thicker sections, build in layers, priming with Terrabond A between them.
  6. Finish: close with a steel float. For a smooth, decorative finish, skim with Terraroc FC.
  7. Cure: apply Terrabond A straight after finishing. In harsh conditions, which in the UAE means most of the year, also cover with hessian or polythene.

How much do you need?

Repair depthConsumptionArea per 25 kg bag
10 mm19 kg/m²about 1.3 m²
25 mm47.5 kg/m²about 0.5 m²
50 mm95 kg/m²about 0.26 m²

Or work by volume: one bag makes about 14 litres, so 1 m³ of repair needs about 72 bags. Example: 2 m² of spalled soffit at an average 25 mm needs about 95 kg, so allow 4 bags.

Storage and safety

  • Store in a clean, dry place out of the sun. Shelf life is 6 months unopened; use the oldest stock first.
  • Cement-based: wear gloves and eye protection, and avoid prolonged skin and eye contact.

Frequently asked questions

What is the maximum thickness?

75 mm vertical and 50 mm overhead in a single application, with a minimum of 10 mm.

FMR or MBR?

FMR is the high-strength, fibre-modified high-build mortar (60 N/mm² at 28 days). Terraroc MBR is a medium-build mortar (10–50 mm vertical, 25 N/mm²) for less demanding repairs.

Do I need to treat the steel?

Yes. Terraco’s system treats exposed reinforcement with Epiprime ZR before repair.

Data sheet and related products

Technical data from the Terraco data sheet for Terraroc FMR (version 10.2011). Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top