Terraco Terrascreed GP 100 is a polymer-modified, cement-based self-levelling floor compound that levels indoor concrete floors and screeds in layers of 2–10 mm, ready for carpet, tiles, vinyl, wood and other floor finishes. This listing is the 23 kg bag. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terrascreed GP 100 from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is Terrascreed GP 100?
Terrascreed GP 100 is a powder of hydraulic and organic binders, plasticisers, adhesion promoters and water-retention agents. Mixed with water, it flows out and levels itself, so even a large room gets a flat, smooth surface without hand-screeding. Flat substrates matter for every modern floor finish: vinyl and LVT show every bump, large-format tiles need a level base to avoid lippage, and engineered wood needs a flat, stable surface.
It suits homes, offices, schools and shops, and is walkable after about 12 hours, which keeps fit-out programmes moving.
Where to use it
- Levelling indoor concrete floors and screeds before carpet, tiles, wood or other finishes
- Residential, office, school and retail floors
Dry indoor areas only. For balconies, garages and outdoor areas, use Terrascreed EX500.
Technical data
| Type | Polymer-modified cement-based self-levelling compound |
| Thickness | 2–10 mm per layer |
| Mixing water | 5.00–5.25 L per 23 kg bag |
| Pot life (25 °C) | 30–40 minutes |
| Foot traffic | After 12 hours |
| Consumption | 1.66 kg/m² per mm |
| Compressive strength | > 20 N/mm² |
| Flexural strength | > 5 N/mm² |
| Bond strength | B1 |
| Length change | ± 0.05% |
| Packaging | 23 kg paper bags |
| Shelf life | 6 months unopened |
Preparing the floor
- The concrete must have cured for 3–4 weeks.
- Repair cracks, chips and voids first.
- Prime with Terrabond A diluted 1:5 with clean water, or 2–3 coats on very absorbent or porous floors and in extreme climates.
Mixing and laying
- Mix a 23 kg bag with 5.00–5.25 litres of water for 3 minutes, using a high-speed mixer or hand agitator, until lump-free.
- Pour onto the primed floor and spread with a smoothing trowel or spreader.
- Roll with a spiked (porcupine) roller to release air. The compound levels itself.
- Work within the 30–40 minute pot life.
- Allow foot traffic after 12 hours. Let it dry fully before laying moisture-sensitive finishes.
How much do you need?
| Thickness | Consumption | Area per 23 kg bag |
|---|---|---|
| 3 mm | 5.0 kg/m² | about 4.6 m² |
| 5 mm | 8.3 kg/m² | about 2.8 m² |
| 10 mm | 16.6 kg/m² | about 1.4 m² |
Example: levelling a 20 m² room at an average 3 mm needs about 100 kg, so allow 5 bags. Based on Terraco’s 1.66 kg/m²/mm.
Storage and safety
- Store dry and away from direct sun and temperature extremes. Shelf life is 6 months unopened.
- Cement-based: avoid prolonged skin and eye contact.
Frequently asked questions
Can I use GP 100 outside or in wet areas?
No. Terraco says dry indoor areas only.
How long before I can walk on it?
About 12 hours.
Do I need a primer?
Yes: Terrabond A diluted 1:5, with extra coats on absorbent floors.
Data sheet and related products
Technical data from the Terraco UAE data sheet for Terrascreed GP 100. Always check the latest data sheet before specifying.


Reviews
There are no reviews yet.