Terraco Terrabond AP201 – 0.9Kg

Terraco Terrabond AP201 – 0.9Kg, available from Al Tashteb Al Saree in Bu-Tina, Sharjah. Ask for price and stock on WhatsApp or call us.

WhatsApp usCall now

SKU: ATS-TER-B000034 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco Terrabond AP201 – 0.9Kg is Terraco’s water-based adhesion promoter that helps textured coatings, paints and waterproofings bond to smooth, non-absorbent surfaces such as dense concrete, tiles, glass and metal. This listing is the 0.9 kg pack, a small size for touch-ups and small jobs (Terraco’s data sheet lists 4 kg and 20 kg, so confirm the pack with us when you order). One coat covers about 9–13 m² on non-absorbent surfaces. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terrabond AP201 from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is Terraco Terrabond AP201?

Terrabond AP201 is Terraco’s water-based adhesion promoter (product code 68236). It is an acrylic copolymer emulsion, APEO-free and low in VOC, that goes on as a yellow liquid and dries to a translucent yellow film. It is designed to help Terraco textured coatings, emulsion paints and waterproofings bond to smooth, dense or non-absorbent surfaces: fair-faced dense concrete, microsilica concrete, ceramics, mild, stainless and galvanised steel, aluminium and glass.

That makes it useful in UAE refurbishment work, for example coating over old ceramic tiles, priming galvanised railings and metal doors before a texture coat, or getting a finish to bond to very smooth precast panels. Terraco also lists corrosion inhibition and water and alkali resistance among its properties.

Where to use it

  • Primer under Terraco textured coatings, emulsion paints and waterproofings
  • Interior and exterior surfaces
  • Fair-faced dense concrete and microsilica concrete
  • Ceramics and glass
  • Mild steel, stainless steel, galvanised steel and aluminium

Technical data

TypeWater-based acrylic copolymer adhesion promoter
Product code68236
AppearanceYellow liquid, dries to a translucent yellow film
Viscosity (25 °C)25–50 cps
pH8–9
Specific gravity1.01 ± 0.05
Coverage10–15 m²/kg on non-absorbent surfaces
DilutionUndiluted on non-porous surfaces; 1:3 with water (by weight) on porous surfaces such as concrete
VOCLow, APEO-free
Packaging (data sheet)4 kg and 20 kg jerrycans
Shelf life12 months unopened

How much do you need?

PackOne coat, undiluted, on non-absorbent surfaces
4 kgabout 40–60 m²
20 kgabout 200–300 m²

Example: priming 30 m² of old wall tiles before a texture coat needs about 2–3 kg undiluted, so one 4 kg pack covers one coat. Based on Terraco’s 10–15 m²/kg. Porous surfaces use the diluted mix, and a second coat doubles the quantity.

Preparing the surface

  1. Remove dust, dirt, salts, oil, grease, curing compounds and ridges.
  2. Remove all rust from metal.
  3. Repair dents and holes with a suitable compound.
  4. Protect adjacent surfaces. The surface must be clean and dry.

How to apply

  1. Stir until the liquid is uniform.
  2. On non-porous surfaces, use it undiluted. On porous surfaces such as concrete, dilute 1 part AP201 to 3 parts water by weight.
  3. Apply a thin, even film by brush, roller or spray, covering the surface completely.
  4. Let it dry. Apply a second thin coat if the surface needs it.
  5. Paint or coat the primed surface as soon as possible for the best adhesion.
  6. Clean tools with water.

Storage and safety

  • Store in a clean, dry area away from direct sun and extreme heat or cold. Shelf life is 12 months unopened.
  • Avoid prolonged contact with skin and eyes, and see the safety data sheet for details.

Frequently asked questions

Can I use AP201 on galvanised steel or aluminium?

Yes. Galvanised steel, stainless steel, mild steel and aluminium are all listed substrates. Clean and de-rust them first.

Do I dilute it?

Not on non-porous surfaces such as tiles, glass and metal. On porous concrete, dilute 1:3 with water by weight.

What’s the difference between AP201 and Terrabond A?

AP201 is an adhesion promoter for smooth, non-absorbent surfaces under coatings and paints. Terrabond A is a bonding agent and primer for porous cementitious surfaces and an additive for mortars.

Data sheet and related products

Technical data from the Terraco data sheet for Terrabond AP201. Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top