Person applying cement mortar to a brick wall with a trowel

Terraco Terramix Fine Repair Mortar | Terraco UAE Distributor in Sharjah & Dubai

Terramix Fine is Terraco’s ready-mixed repair compound and thin-layer plaster in powder form, for smoothing and repairing concrete, blockwork and brickwork inside and out. Just add water. Al Tashteb Al Saree is an authorised Terraco distributor and supplies Terramix Fine direct from the manufacturer in Sharjah, Dubai and across the UAE.

Technical specifications

ManufacturerTerraco
Product codes77130 (grey), 77150 (white)
Product typeReady-mixed repair compound and thin-layer plaster (powder)
BindersHydraulic and organic
ColoursGrey, white
Mixing water6.0 to 6.5 litres per 25 kg bag
Thickness1 to 3 mm
Consumption1.8 kg/m² per mm of thickness
ApplicationTrowel and steel float; spray possible
CuringKeep moist for the first 48 hours
UseInterior and exterior
Packaging25 kg paper bags
Shelf life6 months, unopened
Source: Terraco UAE technical data sheet.

Strength data

PropertyResult
Flexural strength> 4.0 N/mm²
Compressive strength> 6.5 N/mm²
Adhesion strength> 0.5 N/mm²
ShrinkageMax. 0.13%
Tested to EN 998 / ASTM 157, as stated by the manufacturer.

Coverage per bag

ThicknessApprox. area per 25 kg bag
1 mm13.9 m²
2 mm6.9 m²
3 mm4.6 m²
Calculated from the stated 1.8 kg/m² per mm.

Uses

Plastering and repairing cast-in-situ concrete, lightweight concrete, fair-faced dense concrete, blockwork and brickwork, inside and outside. The finished surface is suitable for painting and wallpapering. Terraco lists it as water resistant and crack resistant with a smooth finish.

Preparation, mixing and application

  1. Remove loose particles, dust, dirt, grease, oil and paint. Dampen absorbent surfaces with water. In extreme heat or on very absorbent surfaces, prime with Terrabond A diluted 1:5.
  2. Mix 25 kg of powder with 6.0 to 6.5 litres of water for 3 to 5 minutes with a high-speed mixer or hand agitator. Stand 5 minutes, then re-stir.
  3. Apply by trowel, 1 to 3 mm thick, and level with a steel float.
  4. Once set, smooth with a damp wooden or foam float; brush off loose particles when dry.
  5. Keep the surface moist for the first 48 hours. Clean tools with water.

See all Terraco products we supply in Sharjah and Dubai.

Downloads

Specifications on this page are taken from the manufacturer’s data sheet, retrieved 1 November 2026. Always check the latest data sheet before specifying.

Frequently asked questions

Where can I buy Terraco Terramix Fine in Sharjah or Dubai?

Al Tashteb Al Saree is an authorised Terraco distributor and stocks Terramix Fine in grey and white. Message us on WhatsApp.

Terramix Fine or Handycoat?

Terramix Fine is a cement-based powder for 1 to 3 mm plastering and repairs. Handycoat fillers are ready-mixed pastes for thin repairs up to 1 mm per coat before painting.

Order from an authorised Terraco distributor

We supply the full Terraco range direct from the manufacturer, alongside National Paints, Berger and Jotun, with delivery in Sharjah and Dubai.

Shopping Cart
Scroll to Top