Terraco Terracoat Stain

Low-profile pigmented topcoat for textured finishes. Supplied by Al Tashteb Al Saree, authorised Terraco distributor in Sharjah and Dubai.

SKU: ATS-TER-H1358 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco Terracoat Stain is Terraco’s pure acrylic, low-profile pigmented topcoat for Terracoat textured coatings, adding UV, fade and dirt pick-up resistance with a mid-sheen finish. The data sheet lists 5 kg and 20 kg pails. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terracoat Stain from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is Terracoat Stain?

Terracoat Stain is a ready-mixed, pure acrylic topcoat with fade-resistant pigments and a film preservative. It goes over pigmented or unpigmented Terracoat where extra dirt pick-up resistance is needed, which suits dusty UAE conditions, and it can also renovate old textured facades after proper preparation. It has high opacity but a low profile, so it colours and protects the texture without filling it in, and it leaves a breathable, mid-sheen film.

Where to use it

  • Topcoat over new Terracoat textured coatings
  • Topcoat over Terol renders on EIFS
  • Renovation overcoat on old textured facades

Technical data

BinderPure acrylic
Product codes61223, 61225, 61226, 61227
BasesWhite, Pastel, Mid and Clear
FinishMid sheen
Viscosity2,000 cps
Specific weight1.15
Consumption0.2–0.3 kg/m² for two coats
Packaging (data sheet)5 kg and 20 kg plastic pails
Shelf life12 months unopened

How much do you need?

PackArea, two coats
5 kgabout 17–25 m²
20 kgabout 67–100 m²

Example: a 200 m² textured facade needs about 40–60 kg for two coats, so allow three 20 kg pails. Based on Terraco’s 0.2–0.3 kg/m².

How to apply

  1. New Terracoat: let it dry for 72 hours. No primer is needed.
  2. Old textured surfaces: check soundness, repair damage, remove flaking material and apply fresh base texture where needed. Clean with a soda/water solution, rinse, and treat mould, fungus or algae with a sterilising solution. Then apply a coat of Terraco Penetrating Primer.
  3. Apply two coats by spray, roller or brush.
  4. Clean tools with water.

Storage and safety

  • Store in a clean, dry area away from direct sun and extreme heat or cold. Shelf life is 12 months unopened.
  • Avoid prolonged contact with skin and eyes, and see the safety data sheet for details.

Frequently asked questions

Do I need Terracoat Stain over Terracoat?

It is optional. Use it where you want extra dirt pick-up and fade resistance, or to change or refresh the colour of an existing texture.

Can it refresh an old textured facade?

Yes, after cleaning, repair and a coat of Penetrating Primer.

Choosing a base

BaseUse it for
WhiteWhite and very light finishes
PastelLight tinted colours
MidMedium-depth colours
ClearDeep colours, where most of the tint comes from colourant

Tell us the colour code you want and we’ll confirm the right base when you order.

Why use a stain over textured coatings in the UAE?

Textured facades collect desert dust in their grain, and strong year-round UV fades colour over time. A low-profile pure acrylic topcoat seals the surface of the texture, so dust washes off more easily and the colour lasts longer, without filling in the pattern. It is also a cost-effective way to refresh or change the colour of an existing Terracoat facade instead of re-texturing it.

Typical system on a new facade

  1. Prime with Tex Primer, tinted close to the finish.
  2. Apply Terracoat in the chosen texture.
  3. Wait 72 hours.
  4. Apply two coats of Terracoat Stain at a combined 0.2–0.3 kg/m².

Typical system on an old textured facade

  1. Check the texture is sound, and repair or re-texture damaged areas.
  2. Clean with a soda/water solution and rinse; treat any mould or algae with a sterilising solution.
  3. Apply one coat of Terraco Penetrating Primer.
  4. Apply two coats of Terracoat Stain.

Application tips

  • Work in the shade where possible and avoid painting walls in direct midday sun, which dries the coat too fast and can leave lap marks.
  • Keep a wet edge and finish each elevation at a natural break such as a corner or joint.
  • Use the same batch across one elevation, or mix batches together first, to avoid slight colour differences.

Data sheet and related products

Technical data from the Terraco data sheet for Terracoat Stain. Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top