Terraco Tex Primer

Consolidation primer, white or tinted. Supplied by Al Tashteb Al Saree, authorised Terraco distributor in Sharjah and Dubai.

SKU: ATS-TER-H1379 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco Tex Primer is Terraco’s pigmented primer (code 68140) that binds the surface and gives a mechanical key for Terracoat and other textured finishes. The data sheet lists 3.6 L and 18 L pails. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Tex Primer from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is Tex Primer?

Tex Primer is an aqueous acrylic copolymer primer that penetrates cementitious surfaces, plasters and limes and binds them. Unlike a clear sealer, it is pigmented and provides a mechanical key, a slightly gritty surface that helps trowel-applied textured coatings grip. Terraco specifies one coat of Tex Primer, tinted close to the topcoat colour, as the standard primer under its Terracoat textured coatings.

It also improves adhesion, binds dusting substrates and reduces efflorescence and surface alkalinity. It is especially suited to sealing old, dry, absorbent, untreated concrete.

Where to use it

  • Interior and exterior surfaces
  • Sand/cement render, cast in-situ, precast and lightweight concrete, and blockwork
  • Under Terracoat and other decorative finishes, including on Terraco EIFS

Technical data

TypeAqueous acrylic copolymer emulsion, pigmented
Product code68140
ColourWhite, or tinted to match the finish
Viscosity (23 °C)6,000–10,000 cps
pH8–9
Specific gravity1.45 ± 0.05
Coverage8–10 m² per litre, depending on the surface
Packaging (data sheet)3.6 L and 18 L pails
Shelf life12 months unopened

How much do you need?

PackArea per coat
3.6 Labout 29–36 m²
18 Labout 144–180 m²

Example: a 200 m² villa facade needs about 20–25 litres for one coat, so allow one 18 L pail plus one 3.6 L pail, or two 18 L pails on rough or absorbent render. Based on Terraco’s 8–10 m²/L.

How to apply

  1. Scrape and brush off dust, dirt and loose matter. The surface must be free of salts, oil, grease and ridges.
  2. Mask adjacent areas, and repair cracks, chips and voids with a suitable Terraco repair compound.
  3. Stir until uniform.
  4. Apply generously and evenly by brush, roller or spray, and let it dry.
  5. Apply a second coat if the surface needs it.
  6. Apply the topcoat as soon as possible for the best adhesion. Clean tools with water.

On porous or dusty surfaces and over EIFS basecoat, Terraco’s Terracoat data sheet calls for one coat of Terrabond A diluted 1:5 first, then Tex Primer once it is dry.

Storage and safety

  • Store in a clean, dry area away from direct sun and extreme heat or cold. Shelf life is 12 months unopened; use the oldest stock first.
  • Avoid prolonged contact with skin and eyes, and see the safety data sheet for full details.

Frequently asked questions

Which primer goes under Terracoat?

Tex Primer, tinted similar to the topcoat, is Terraco’s standard primer for Terracoat.

Can it be tinted?

Yes. It is supplied white or tinted to match the finish colour.

Data sheet and related products

Technical data from the Terraco data sheet for Tex Primer. Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top