Terraco Terramix Fine Repair Mortar

Repair mortar and plaster, 1 to 3 mm. Supplied by Al Tashteb Al Saree, authorised Terraco distributor in Sharjah and Dubai.

SKU: ATS-TER-H1385 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco Terramix Fine Repair Mortar is Terraco’s ready-mixed, polymer-modified repair mortar and thin plaster for skimming and levelling concrete and blockwork in layers of 1–3 mm, inside and out, before paint. It comes in 25 kg bags, in grey and white. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terramix Fine from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is Terraco Terramix Fine?

Terramix Fine is Terraco’s ready-mixed, polymer-modified repair mortar and thin-layer plaster for walls and ceilings, inside and out. It is a powder of hydraulic and organic binders, graded inert fillers, plasticisers, adhesion promoters and water retainers; you add clean water on site. It repairs and levels surfaces in layers of 1–3 mm and leaves a hard, smooth, water-resistant finish ready for paint or wallpaper. It can be applied by hand or by spray.

Terramix comes in three grades by layer thickness: Fine (1–3 mm), Standard (3–5 mm) and Coarse (5–15 mm). Fine is the grade for skimming blowholes, honeycombing and surface pitting on fair-faced concrete, evening out patch repairs, and putting a smooth cementitious skin on blockwork before paint. On UAE sites it is often the step between the concrete contractor and the painter.

Where to use it

  • Cast in-situ concrete, lightweight concrete and fair-faced dense concrete
  • Concrete blockwork and brickwork
  • Interior and exterior walls and ceilings
  • Thin repairs and levelling up to 3 mm before painting

For deeper repairs, use Terramix Standard or Coarse, or a Terraroc structural repair mortar for concrete repairs.

Technical data

TypeReady-mixed polymer-modified cementitious repair mortar (powder)
Colours / codesGrey 77130; white 77150
Layer thickness1–3 mm
Mixing water6.0–6.5 L per 25 kg bag
Consumption1.8 kg/m² per mm
Compressive strength (EN 998)> 6.5 N/mm²
Flexural strength (EN 998)> 4.0 N/mm²
Adhesion (EN 998)> 0.5 N/mm²
Shrinkage (ASTM C157)Max 0.13%
Packaging25 kg paper bags
Shelf life6 months unopened

Preparing the surface

  1. Remove loose particles, dust, dirt, grease, oil and paint.
  2. Wet absorbent or porous backgrounds before applying.
  3. On very absorbent surfaces, or in extreme climates, which includes most UAE summers, prime with Terrabond A diluted 1:5 with water.

Mixing and application

  1. Add a 25 kg bag to 6.0–6.5 litres of clean water. Mix for 3–5 minutes, leave for 5 minutes, then re-stir.
  2. Trowel on in layers of 1–3 mm and level with a steel float.
  3. Once it has set, smooth it with a moistened wooden or foam float.
  4. When dry, brush off loose particles for the smoothest finish.
  5. Don’t leave material standing in spray equipment for more than 30 minutes.
  6. Cure: keep the surface moist for the first 48 hours. In UAE heat, this is what stops cracking and dusting.
  7. Clean tools with water.

How much do you need?

Average thicknessConsumptionArea per 25 kg bag
1 mm1.8 kg/m²about 13.9 m²
2 mm3.6 kg/m²about 6.9 m²
3 mm5.4 kg/m²about 4.6 m²

Example: skimming 50 m² of fair-faced concrete at an average 2 mm needs about 180 kg, so allow 8 bags. Based on Terraco’s 1.8 kg/m²/mm.

Storage and safety

  • Store dry, out of direct sun and away from extreme temperatures. Shelf life is 6 months unopened, so use the oldest stock first.
  • Cement-based: avoid prolonged skin and eye contact, and wear gloves and eye protection.

Frequently asked questions

Grey or white?

Grey for general repairs under paint. White where a lighter base helps light or white paint finishes cover in fewer coats.

Can I use it outside?

Yes. It is for interior and exterior walls and ceilings, and gives a water-resistant finish.

How thick can I apply Fine?

1–3 mm. Use Standard (3–5 mm) or Coarse (5–15 mm) for thicker repairs.

Data sheet and related products

Technical data from the Terraco UAE data sheet for Terramix Fine. Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top