Terraco Terraroc FC – 20Kg is Terraco’s ready-to-use micro-finish coat render (code 77250), the final 0.5–3 mm coat that makes repaired concrete uniform and ready to decorate. This listing is sold as a 20 kg bag; Terraco’s data sheet lists 25 kg bags, so check the pack size with us when you order. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terraroc FC from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is Terraco Terraroc FC?
Terraroc FC is Terraco’s ready-to-use micro-finish coat render for concrete (product code 77250). It is a blend of cements, graded fillers, polymers and water-retaining additives, bound with hydraulic and organic binders. It is the final coat in the Terraco concrete repair system, giving repaired concrete a smooth, uniform surface ready to decorate. It can also be used on its own as a thin render, 0.5–3 mm, to repair fine cracks and surface defects.
Concrete repairs are usually patchy: different textures, colours and edges where new mortar meets old concrete. Terraroc FC skims the whole area so columns, beams, soffits and facades look uniform again before painting or protective coating. Its strength is high for a thin coat, with compressive strength of at least 20 N/mm² and tensile adhesion of at least 1 N/mm².
Where to use it
- Final coat over Terraco structural repair mortars such as Terraroc FMR and Terraroc MBR
- Thin render to repair fine cracks and surface defects on concrete
- Interior and exterior concrete
Technical data
| Type | Ready-to-use micro-finish coat render |
| Product code | 77250 |
| Colours | Grey and white |
| Thickness | 0.5–3.0 mm |
| Mixing water | 8.25–8.75 L per 25 kg (33–35%), depending on thickness |
| Yield | 17.5 L of mix per 25 kg with 8.75 L water |
| Consumption | 1.5 kg/m² per mm |
| Set time | 1–2 hours |
| Flexural strength (EN 1015-11) | ≥ 5 N/mm² |
| Compressive strength (EN 1015-11) | ≥ 20 N/mm² |
| Tensile adhesion | ≥ 1 N/mm² |
| Packaging (data sheet) | 25 kg valve craft bags |
| Shelf life | 12 months unopened |
Preparing the surface
- Remove oil, grease, dirt and loose particles.
- Soak the concrete thoroughly with water before applying, leaving no standing water.
Mixing and application
- Mix a 25 kg bag with 8.25–8.75 litres of clean water for 3–5 minutes. Use less water for thin coats and more for thicker ones within the range.
- Leave for 5 minutes, then re-stir.
- Spray on and level with a steel float, keeping within 0.5–3 mm.
- Once set, smooth with a moist wooden float or foam, then brush off loose particles.
- Cure: keep the surface moist for the first 48 hours. In UAE sun and wind, thin cementitious coats dry out very fast, so mist or cover them.
- Clean tools with water.
How much do you need?
| Thickness | Consumption | Area per 25 kg bag |
|---|---|---|
| 1 mm | 1.5 kg/m² | about 16.7 m² |
| 2 mm | 3.0 kg/m² | about 8.3 m² |
| 3 mm | 4.5 kg/m² | about 5.6 m² |
Example: finishing 40 m² of repaired columns and soffits at 1.5 mm needs about 90 kg, so allow 4 × 25 kg bags. Based on Terraco’s 1.5 kg/m²/mm.
Storage and safety
- Store dry, away from direct sunlight and extreme heat or cold. Shelf life is 12 months unopened; use opened bags first.
- Cement-based: avoid prolonged skin and eye contact.
Frequently asked questions
Can I use Terraroc FC on its own?
Yes, as a thin render to repair fine cracks and surface defects on concrete.
How thick?
0.5–3 mm. Deeper repairs need a structural repair mortar first.
How soon can I paint?
After curing. Keep it moist for 48 hours, let it dry, then follow your paint system’s requirements.
Data sheet and related products
- Terraroc FC data sheet (PDF, Terraco UAE)
- Terraroc FC product page and concrete repair guide
- All Terraco products we supply
Technical data from the Terraco UAE data sheet for Terraroc FC. Always check the latest data sheet before specifying.


Reviews
There are no reviews yet.