Terraco Terramix Standard SP – 25Kg / Grey is Terraco’s polymer-modified masonry repair mortar for levelling and repairing concrete, blockwork, AAC and brickwork in layers of 2–12 mm, inside and out. This listing is grey, the 25 kg pack. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terramix Standard SP from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Grey is the usual choice for general repairs and levelling.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is Terraco Terramix Standard SP?
Terramix Standard SP is Terraco’s polymer-modified cementitious masonry repair mortar (product code 77161). It is a powder of hydraulic and organic binders, washed and graded sand or quartz, plasticisers, adhesion promoters and water retainers. Mixed with water, it levels and repairs masonry, plasters walls and repairs concrete, inside and out, in layers of 2–12 mm, ready for paint or wallpaper. It can be troweled or sprayed.
The 2–12 mm range makes Standard SP the workhorse grade: thick enough to fill chased walls, rebuild broken arrises and level uneven blockwork, and fine enough to finish smooth with a float. It works on concrete blockwork and AAC blocks, both widely used in UAE construction.
Where to use it
- Levelling and repairing masonry surfaces
- Plastering, and repairing concrete
- Cast in-situ, lightweight and fair-faced dense concrete
- Concrete blockwork, AAC blockwork and brickwork
- Interior and exterior walls to be painted or wallpapered
Technical data
| Type | Polymer-modified cementitious repair mortar (powder) |
| Product code | 77161 |
| Colours | Natural white and grey |
| Layer thickness | 2–12 mm |
| Mixing water | 5.5–6.0 L per 25 kg bag |
| Pot life | Use within 30 minutes of mixing |
| Consumption | About 1.5 kg/m² per mm |
| Adhesion | > 0.5 N/mm² |
| Shrinkage (ASTM C157) | Max 0.13% |
| Spray equipment | TUMAC P10/P15 recommended |
| Packaging | 25 kg paper bags |
| Shelf life | 12 months unopened |
Preparing the surface
- Clean off dust, dirt, grease, oil and loose material.
- Dampen absorbent surfaces before applying.
- In extreme climates and on very absorbent backgrounds, prime or use Terrabond A as Terraco advises.
Mixing and application
- Add a 25 kg bag to 5.5–6.0 litres of clean water and mix for 3–5 minutes.
- Leave for about 3 minutes, then re-stir.
- Use within 30 minutes of mixing, and don’t leave mixed material in spray equipment for more than 30 minutes.
- Trowel on in layers of 2–12 mm and level with a steel float.
- Once set, smooth with a moistened wooden or foam float. When dry, brush off loose particles.
- Cure: keep the surface moist for the first 48 hours.
- Clean tools with water.
How much do you need?
| Average thickness | Consumption | Area per 25 kg bag |
|---|---|---|
| 3 mm | 4.5 kg/m² | about 5.6 m² |
| 5 mm | 7.5 kg/m² | about 3.3 m² |
| 10 mm | 15 kg/m² | about 1.7 m² |
Example: levelling 30 m² of blockwork at an average 5 mm needs about 225 kg, so allow 9 bags. Based on Terraco’s figure of about 1.5 kg/m²/mm.
Storage and safety
- Store dry and away from humidity, sun and temperature extremes. Shelf life is 12 months unopened.
- Cement-based: avoid prolonged skin and eye contact, and wear gloves and eye protection.
Frequently asked questions
Can it go on AAC blocks?
Yes. AAC blockwork is listed as a suitable background. Dampen it first, because AAC is very absorbent.
How thick can I apply it?
2–12 mm per layer.
Grey or off-white?
Grey for general repairs. Off-white where you want a lighter base under light paint colours.
Data sheet and related products
- Terramix Standard SP data sheet (PDF, Terraco UAE, 05.2015)
- Terramix Coarse and Standard product page
- Terramix Fine for 1–3 mm skims
- All Terraco products we supply
Technical data from the Terraco UAE data sheet for Terramix Standard SP. Always check the latest data sheet before specifying.


Reviews
There are no reviews yet.