Terraco Terrafix W32 Tile Adhesive – 20Kg / White is Terraco’s flexible C2TE S1 tile adhesive (EN 12004) for ceramic and stone tiles on interior and exterior walls, over existing tiles, on gypsum board and over Weathercoat waterproofing. This listing is white, the 20 kg pack. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terrafix W32 from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
White is the usual choice for light-coloured stone, glass mosaic and translucent tiles, where grey adhesive could show through or darken the joints.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is Terraco Terrafix W32?
Terrafix W32 is Terraco’s flexible, cement-based wall tile adhesive, classified C2TE S1 to EN 12004. It is made with hydraulic and organic binders, plasticisers, adhesion promoters and water-retaining additives. It combines high adhesion, non-slump behaviour, extended open time and a measure of flexibility, so it can take small movements in the background without the tiles letting go.
That makes W32 the adhesive to reach for on harder jobs: stone and ceramic tiles over existing tiled walls, gypsum board, and walls waterproofed with Terraco Weathercoat, which the data sheet names specifically. In the UAE, walls see big daily temperature swings, especially on facades and sun-facing elevations. Flexible adhesives are widely chosen for these walls because they tolerate movement better than rigid ones.
What does C2TE S1 mean?
- C: cementitious adhesive.
- 2: improved adhesion. The data sheet gives tensile adhesion above 1.0 N/mm² (EN 1348): standard, after heat ageing, after water immersion and after freeze/thaw.
- T: reduced slip on walls.
- E: extended open time, more than 30 minutes.
- S1: deformable. EN 12004 uses the S classes for adhesives that can bend slightly, measured as transverse deformation; S1 is the first deformability class.
Technical data
| Classification | C2TE S1 to EN 12004 |
| Colours | Grey (product code 75600) and white (75605) |
| Tensile adhesion (EN 1348) | > 1.0 N/mm²: standard, heat ageing, water immersion, freeze/thaw |
| Mixing water | 26–28%: 5.2–5.6 L per 20 kg bag |
| Open time | More than 30 minutes |
| Adjustability | More than 45 minutes |
| Pot life | 2 hours (the data sheet also says to use mixed material within 1 hour; follow the shorter time) |
| Bed thickness | Approx. 3 mm |
| Application temperature | 5 °C to 35 °C |
| Ready to grout | 24 hours |
| Ready for use | 14 days |
| Packaging | 20 kg bags |
| Shelf life | 12 months unopened |
Where to use it
- Ceramic and stone tiles on interior and exterior walls.
- Over existing tiled surfaces, for renovations without stripping old tiles.
- Over surfaces waterproofed with Terraco Weathercoat, where extended open time is needed: wet rooms, shower walls and similar.
- Masonry backgrounds such as sand/cement render and precast concrete, and gypsum board.
Plan expansion joints at the design stage, as the data sheet advises.
Preparing the surface
- Clean the surface so it is free of dust, grease and loose material. Old tiles must be sound and firmly bonded.
- Wet absorbent backgrounds thoroughly before tiling.
- Treat dusting surfaces with Terraco Penetrating Primer Clear, or with Terrabond A diluted 1:5 with water.
Mixing and fixing
- Add a 20 kg bag to 5.2–5.6 litres of clean water and mix to a smooth, creamy paste.
- Leave to stand for 5 minutes, then re-stir.
- Apply about 3 mm with the smooth side of a notched trowel, then comb with the notched edge.
- Press tiles in firmly before the adhesive surface dries. Use spacers for even joints.
- Apply between 5 °C and 35 °C.
- Grout after 24 hours with Terragrout G11. Ready for use after 14 days.
How much do you need?
| Method | Consumption | Area per 20 kg bag |
|---|---|---|
| No. 4 notched trowel | 2–2.5 kg/m² | 8.0–10.0 m² |
| No. 5 notched trowel | 2.5–3 kg/m² | 6.7–8.0 m² |
| No. 6 notched trowel | 4–6 kg/m² | 3.3–5.0 m² |
Example: a 20 m² bathroom wall tiled with a No. 5 trowel uses about 50–60 kg, so allow 3 × 20 kg bags. Consumption rates are Terraco’s; areas are calculated from them. Uneven walls and larger notches use more, so order a little extra.
Storage, shelf life and safety
- Store in a clean, dry area away from direct sunlight and extreme heat and cold.
- Unopened bags can be stored for 12 months. Use the oldest material first.
- Avoid prolonged contact with eyes and skin. Wear gloves and eye protection, and see the material safety data sheet for handling details.
Frequently asked questions
W32 or W22?
Both are C2TE: improved adhesion, reduced slip and extended open time. W32 adds S1 deformability, so it is the better choice where the background may move, such as tile-on-tile, gypsum board, waterproofed walls and sun-exposed elevations. For straightforward walls, W22 is enough.
Can I tile over a waterproofing coat?
Yes. The data sheet names tiling over surfaces waterproofed with Terraco Weathercoat as a W32 use.
Can I tile over existing tiles?
Yes, if the old tiles are firmly bonded and clean. Degrease glazed tiles before you start.
How much water do I add?
5.2–5.6 litres per 20 kg bag.
Grey or white?
Grey for standard tiles. White for light-coloured stone, glass mosaic and translucent tiles, where grey could show through.
Data sheet and related products
- Terrafix W32 technical data sheet (PDF, Terraco UAE)
- Terrafix W22 (C2TE) and Terrafix W11 (C1T)
- Weathercoat GP waterproofing
- Terragrout G11 tile grout
- All Terraco products we supply
Technical data from the Terraco UAE data sheet for Terrafix W32. Always check the latest data sheet before specifying.


Reviews
There are no reviews yet.