Terraco 25Kg Spray Plaster Basecoat

Terraco 25Kg Spray Plaster Basecoat, available from Al Tashteb Al Saree in Bu-Tina, Sharjah. Ask for price and stock on WhatsApp or call us.

WhatsApp usCall now

SKU: ATS-TER-013287 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco 25Kg Spray Plaster Basecoat is Terraco’s ready-mixed, low-VOC interior basecoat plaster, sprayed or hand-applied to level precast and conventional walls up to 10 mm before the finish coat. This listing is the 25 kg pack. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Sprayplaster Basecoat from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is Terraco Sprayplaster Basecoat?

Sprayplaster Basecoat is Terraco’s polymer-based, low-VOC, ready-to-use interior basecoat plaster. It is a paste of special co-polymer binders and graded inert fillers, sprayed by machine or applied by hand to level walls and correct irregularities, ready for a fine finish coat and paint. Terraco lists it as fire resistant (ASTM E84 Class A), high build, fast drying, vapour permeable and well adhering, and not liable to flake. It complies with Dubai’s Al Sa’fat Green Building Evaluation System.

Spray plaster systems have become a standard way to finish interior walls in UAE towers and villa projects, especially on precast concrete, where a thin, consistent paste coat replaces conventional sand/cement plaster. Terraco’s data sheet gives a daily output of about 500 m² by spray, or 125 m² by hand, for a team of three.

Where to use it

  • Levelling and correcting interior dry-area walls, as a basecoat in precast and conventional buildings
  • Precast and aerated concrete
  • Sand/cement render, and fair-faced or levelled brickwork
  • New or old solid surfaces

Interior dry areas only. Maximum 5 mm per coat and 10 mm total. It can be modified with Sprayplaster CM for a harder, water-resistant surface; modified mixes need up to 72 hours’ curing.

Technical data

TypeSpray-applied, ready-mixed basecoat plaster (paste)
Product code63460
ColourBrown
Specific gravity1.70 ± 0.05
pH8–9
Consumption1.75 kg/m² per mm
ThicknessMax 5 mm per coat, 10 mm total
Between coatsOvernight
VOC< 5 g/L
FireASTM E84 Class A
EquipmentTerraco spray pump, compressor 600 L/min
Output (team of 3)About 500 m²/day by spray, 125 m²/day by hand
Packaging25 kg plastic bags
Shelf life9 months unopened

Preparing the surface

  1. Make sure the background is sound. Brush away dust, dirt and loose material.
  2. Remove ridges, flaking material, curing compounds and form oil.
  3. On very porous surfaces, apply Terrabond A diluted 1:5 with clean water.

How to apply

  1. The paste is ready to use. Thin with 2–3% water only if needed.
  2. By machine: spray the coat, then level it with a steel-edged scraper or spatula, returning excess to the machine.
  3. By hand: apply with a steel-edged scraper or putty knife.
  4. One coat is standard; apply a second if needed, leaving it to dry overnight between coats. Keep within 5 mm per coat and 10 mm total.
  5. During breaks, put the spray gun in water and cover the material in the hopper with a thin layer of water.
  6. Finish with 1–2 coats of Maxispray FC or Sprayplaster Finishcoat, then paint.
  7. Clean tools with water.

How much do you need?

Average thicknessConsumptionArea per 25 kg bag
2 mm3.5 kg/m²about 7.1 m²
3 mm5.25 kg/m²about 4.8 m²
5 mm8.75 kg/m²about 2.9 m²

Based on Terraco’s 1.75 kg/m²/mm. Example: 100 m² of precast wall levelled at an average 3 mm needs about 525 kg, which is 21 bags, so order 22 to leave a margin. Measure actual wall flatness first, because the average thickness drives the quantity.

Storage and safety

  • Store in a clean, dry area, protected from direct sunlight and extreme heat and cold. Shelf life is 9 months unopened; use the oldest first.
  • Avoid prolonged eye and skin contact, and see the safety data sheet.

Frequently asked questions

Can I use it in bathrooms?

Standard Basecoat is for interior dry areas only. Ask us about modifying it with Sprayplaster CM for a harder, water-resistant surface.

Do I need a finish coat?

Yes. Terraco specifies 1–2 coats of Maxispray FC or Sprayplaster Finishcoat over the basecoat before painting.

How thick can it go?

5 mm per coat and 10 mm in total.

Data sheet and related products

Technical data from the Terraco UAE data sheet for Sprayplaster Basecoat. Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top