Terraco Weathercoat GP (A+B) – 20kg

Terraco Weathercoat GP (A+B) – 20kg, available from Al Tashteb Al Saree in Bu-Tina, Sharjah. Ask for price and stock on WhatsApp or call us.

WhatsApp usCall now

SKU: ATS-TER-B005681 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco Weathercoat GP (A+B) – 20kg is Terraco’s two-component cement-acrylic elastomeric waterproofing for roofs, facades, foundations, pools, planters, wet room floors and water tanks. It can be mixed as a coating, slurry or screed. This listing is the 20 kg A+B kit pack. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Weathercoat GP from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is Terraco Weathercoat GP?

Weathercoat GP is Terraco’s two-component, cement-acrylic, elastomeric waterproofing system, mixed on site. Part A is an acrylic resin; Part B is a cement-based powder with crushed, precisely graded fillers, wetting agents and adhesion promoters. Mixed together, they form a flexible, highly adhesive waterproof layer that bridges cracks in the background, resists abrasion and weather, and stays vapour permeable.

The “GP” stands for general purpose, and it is versatile. Changing the ratio of resin to powder turns it into a flexible coating, a thicker slurry or a waterproof screed. Terraco also lists it as non-toxic and suitable for water tanks, and it can be used as an additive in mortars and screeds to raise tensile, compressive and flexural strength while lowering the water–cement ratio.

Where to use it

  • Roofs and facades
  • Foundations and retaining walls
  • Swimming pools and planters
  • Wet room floors
  • Water tanks
  • New and old precast and in-situ concrete

Mix ratios

UseResinPowderWater
Waterproof flexible coating12–
Waterproof flexible slurry130–0.1
Waterproof flexible screed140.1–0.2

Ratios are parts by weight, from Terraco’s data sheet.

Technical data

TypeTwo-component cement-acrylic elastomeric waterproofing
ComponentsA: Weathercoat GP Resin; B: Weathercoat GP Powder
Colours (mixed)Grey and natural white
Specific gravity1.70 ± 0.05 (mixed 1 resin : 3 powder)
Consumption1.5–2.0 kg/m² per 1 mm layer (mixed)
Drying time3 hours in normal conditions
Recoat time6 hours minimum
Pot lifeUse within 1 hour of mixing
PackagingKit: 20 kg pail (5 kg resin + 15 kg powder). Also resin 5 and 20 kg; powder 15 and 25 kg bags
Shelf life12 months in original unopened packs

Preparing the surface

  1. Clean off all dirt and foreign matter, and remove ridges and form oil.
  2. Clean dusty or flaking surfaces thoroughly, then prime with Terraco Penetrating Primer Clear or Terrabond A diluted 1:3 with water.
  3. On hot days, apply to a cool, shaded surface where possible. Fast-drying backgrounds pull moisture out of cement products.

Mixing and application

  1. Add the powder to the resin and mix with a high-speed mixer or power agitator until smooth. For spraying, add just enough water to get a sprayable consistency.
  2. Apply by brush, roller or spray.
  3. Leave at least 6 hours between coats.
  4. Use mixed material within 1 hour. Don’t re-temper it with extra water.
  5. Clean tools with water within an hour of mixing.
  6. Once dry, the coating can be walked on uncovered.

How much do you need?

At 1.5–2.0 kg/m² per millimetre, one 20 kg kit (mixed) covers about 10–13 m² at 1 mm, or 5–6.7 m² at 2 mm.

Example: a 25 m² roof terrace at 2 mm total needs about 75–100 kg of mixed material, so allow 5 kits. Areas are calculated from Terraco’s consumption figure; uneven surfaces use more.

Storage and safety

  • Store in a clean, dry area away from humidity, moisture, direct sun and extreme heat or cold. Use the oldest stock first.
  • Avoid prolonged contact with eyes and skin, and see the safety data sheet.

Frequently asked questions

Can I walk on it?

Yes. Terraco says it can be walked on uncovered once dry.

Can I tile over it?

Yes. Use a suitable tile adhesive. Terraco names Terrafix W32 for tiling over Weathercoat-waterproofed surfaces.

Is it suitable for water tanks?

Terraco lists it as non-toxic and suitable for water tanks. For potable water, confirm the approvals your project needs with us first.

Weathercoat GP or Terracrete?

See our Terracrete vs Weathercoat GP comparison and Weathercoat GP guide.

Data sheet and related products

Technical data from the Terraco UAE data sheet for Weathercoat GP. Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top