Terraco Terrafix W22 Tile Adhesive – 20Kg / Grey is Terraco’s C2TE high-strength, flexible tile adhesive (EN 12004) for ceramic, stone and mosaic tiles on interior and exterior walls, including gypsum board, cement boards and sound painted walls. This listing is grey, the 20 kg pack. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terrafix W22 from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Grey is the standard choice for most ceramic and porcelain tiles.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is Terraco Terrafix W22?
Terrafix W22 is Terraco’s high-strength, flexible, cement-based tile adhesive. It is non-slump, has an extended open time, and passes all the tests for class C2TE under EN 12004. It is made with hydraulic and organic binders, finely graded inert fillers, plasticisers, adhesion improvers and water-retaining agents.
W22 is the step up from Terrafix W11. Where W11 is a general-purpose wall adhesive for stable masonry, W22 grips harder and stays workable longer. That makes it suitable for stone and larger tiles, and for backgrounds such as gypsum board, cement fibre board and sound painted walls. Terraco’s product page describes it for walls and floors, inside and outside, including tiling over existing tiles; the data sheet details wall use.
What does C2TE mean?
- C: cementitious adhesive, mixed with water.
- 2: improved adhesion. Terraco’s data sheet gives tensile adhesion above 1.0 N/mm² (EN 1348) in every test condition: standard, after heat ageing, after water immersion and after freeze/thaw. That is twice the minimum for class 1 adhesives.
- T: reduced slip, so tiles don’t slide down a wall while the adhesive sets.
- E: extended open time, more than 30 minutes, so you can spread a larger area before setting tiles. This helps in UAE heat, when adhesive skins over fast.
Technical data
| Classification | C2TE to EN 12004 |
| Colours | Grey (product code 75570) and white (75575) |
| Tensile adhesion (EN 1348) | > 1.0 N/mm²: standard, heat ageing, water immersion, freeze/thaw |
| Mixing water | 26–28%: about 5.2–5.6 L per 20 kg bag |
| Open time | More than 30 minutes |
| Adjustability | More than 45 minutes |
| Pot life | 2 hours (the data sheet also says to use mixed material within 1 hour; follow the shorter time) |
| Bed thickness | Approx. 3 mm |
| Application temperature | 5 °C to 35 °C |
| Ready to grout | 24 hours |
| Ready for use | 14 days |
| Packaging | 20 kg bags |
| Shelf life | 12 months unopened |
Where to use it
- Ceramic, stone and mosaic tiles on interior and exterior walls, especially where extended open time is needed.
- Sand/cement render and precast concrete.
- Gypsum board and cement fibre boards, such as drywall bathrooms and boarded partitions.
- Sound painted walls, for refurbishments where stripping paint back isn’t practical. The paint must be firmly bonded.
- Tile-on-tile renovations, as described on Terraco’s product page. The old tiles must be sound, clean and well bonded.
Plan expansion joints at the design stage, as the data sheet advises.
Preparing the surface
- The surface must be clean, sound and free of dust, oil, release agents and loose material.
- Wet absorbent, porous backgrounds thoroughly before tiling.
- Treat dusting surfaces with Terraco Penetrating Primer Clear, or with Terrabond A diluted 1:5 with water.
Mixing and fixing
- Add a 20 kg bag to about 5.2–5.6 litres of clean water.
- Mix for 3–5 minutes with a high-speed mixer to a thick, creamy consistency. Leave for 5 minutes, then remix.
- Spread about 3 mm with the smooth side of a notched trowel, then comb with the notched edge.
- Fix the tiles before the adhesive surface dries, pressing them in firmly. Use spacers for even joints.
- Work between 5 °C and 35 °C. In summer, keep bags and water in the shade and tile in the cooler hours.
- Grout after 24 hours with Terragrout G11. The area is ready for use after 14 days.
How much do you need?
| Method | Consumption | Area per 20 kg bag |
|---|---|---|
| No. 4 notched trowel | 2–2.5 kg/m² | 8.0–10.0 m² |
| No. 5 notched trowel | 2.5–3 kg/m² | 6.7–8.0 m² |
| No. 6 notched trowel | 4–6 kg/m² | 3.3–5.0 m² |
Example: a 20 m² bathroom wall tiled with a No. 5 trowel uses about 50–60 kg, so allow 3 × 20 kg bags. Consumption rates are Terraco’s; areas are calculated from them. Uneven walls and larger notches use more, so order a little extra.
Storage, shelf life and safety
- Store in a clean, dry area away from direct sunlight and extreme heat and cold.
- Unopened bags keep for 12 months. Use the oldest stock first.
- Avoid prolonged contact with eyes and skin. Wear gloves and eye protection when mixing, and see the material safety data sheet for full details.
Frequently asked questions
W22 or W11: which should I buy?
Choose W11 (C1T) for ceramic and mosaic on stable render or concrete walls. Choose W22 (C2TE) for stone, larger tiles, gypsum or cement boards, painted walls, tile-on-tile, or when you need more open time. We compare them in detail in Terrafix W22 vs W11.
Can I tile over old tiles with W22?
Terraco’s product page describes W22 as suitable for tile-on-tile. Make sure the old tiles are firmly bonded, clean and free of grease, and check with us for your specific surface.
Can I use W22 on gypsum board?
Yes. The data sheet lists gypsum board and cement fibre boards as suitable backgrounds.
How much water per bag?
About 5.2–5.6 litres per 20 kg bag. Don’t re-temper adhesive that has started to stiffen; mix fresh.
Do you have a more flexible option?
Yes: Terrafix W32 is classed C2TE S1 (deformable), for backgrounds that move more.
Data sheet and related products
- Terrafix W22 technical data sheet (PDF, Terraco UAE, version 07.2023)
- Terrafix W22 product page
- Terragrout G11 tile grout
- All Terraco products we supply
Technical data from the Terraco UAE data sheet for Terrafix W22 (version 07.2023) and Terraco’s product page. Always check the latest data sheet before specifying.


Reviews
There are no reviews yet.