Tall residential building with windows and balconies against a blue sky

Terraco EIFS Polar (XPS) | Terraco UAE Distributor in Sharjah & Dubai

Terraco EIFS Polar is Terraco’s exterior insulation and finish system using extruded polystyrene (XPS) boards. Terraco positions it for hot, humid countries where buildings are air-conditioned inside, which describes most of the UAE. Al Tashteb Al Saree is an authorised Terraco distributor and supplies EIFS Polar components direct from the manufacturer for projects in Sharjah, Dubai and across the UAE.

Why XPS

  • Terraco says XPS’s low vapour permeability helps reduce condensation in hot, humid climates with indoor air conditioning.
  • Enhanced mechanical properties make it suitable for high-traffic areas.
  • Thinner sections can be used where needed, such as around windows and doors.

System components

  1. Terraco Styrofix: adhesive fixing the XPS board to the substrate.
  2. XPS insulation board: thickness to suit the required thermal performance.
  3. Mechanical fasteners: plastic fixings with plastic or steel pins.
  4. System profiles: for openings and sills.
  5. Terraco Styrobond DP basecoat: reinforced with Terramesh glass-fibre mesh.
  6. Terraco P Primer: substrate-penetrating primer.
  7. Decorative finish: such as Terracoat, optionally with a clear or pigmented topcoat.

Thermal performance

XPS thicknessR-value (m²·K)/WU-value W/(m²·K)
50 mm1.670.60
100 mm3.330.30
150 mm5.000.20
200 mm6.670.15
XPS thermal conductivity 0.030 W/(m·K). Board values as published by Terraco; whole-wall values must be calculated by the project consultant.

Terraco’s Polar page does not make fire-rating claims. Insulated facades in the UAE must meet Civil Defence requirements; for projects needing a higher fire rating, see EIFS Perma (mineral wool). Also compare EIFS Alpha (EPS). The Terraco guarantee requires installation by an Approved Terraco EIFS Applicator.

See all Terraco products we supply in Sharjah and Dubai.

Downloads

Information on this page is taken from Terraco’s UAE product page, retrieved 1 November 2026.

Frequently asked questions

Polar, Alpha or Perma?

Polar uses XPS for low vapour permeability and toughness; Alpha uses EPS or graphite EPS and is typically the most cost-effective; Perma uses mineral wool where a higher fire rating is required.

Where can I get EIFS Polar in Sharjah or Dubai?

From Al Tashteb Al Saree, an authorised Terraco distributor. Message us on WhatsApp with your project details.

Shopping Cart
Scroll to Top