Terraco P Primer Clear is Terraco’s clear, deep-penetrating surface consolidation primer (code 68110) for binding dusty, absorbent concrete, render and plaster before decorative finishes. The data sheet lists 5 kg and 20 kg containers. Al Tashteb Al Saree is an authorised Terraco distributor, supplying P Primer Clear from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is P Primer Clear?
P Primer Clear is an aqueous acrylic copolymer primer that soaks deep into cementitious surfaces, plasters and limes and binds them, giving a solid base for Terraco textured coatings, paints and thin-layer mortars. Terraco lists it as improving adhesion, binding dusting substrates, and reducing efflorescence and surface alkalinity.
It is especially suited to sealing old, dry, absorbent, untreated concrete, a common condition on UAE facades and boundary walls that have stood unpainted in the sun. Terraco recommends it before all decorative finishes on concrete, blockwork, cement renders and Terraco EIFS.
Where to use it
- Interior and exterior surfaces
- Sand/cement render
- Cast in-situ, precast and lightweight concrete
- Blockwork
- Terraco EIFS basecoats
Technical data
| Type | Aqueous acrylic copolymer emulsion |
| Product code | 68110 |
| Appearance | Clear |
| Viscosity (23 °C) | 500 cps |
| pH | 8–8.5 |
| Specific gravity | 1.02 |
| Coverage | 0.08–0.10 kg/m², depending on the surface |
| Packaging (data sheet) | 5 kg and 20 kg containers |
| Shelf life | 12 months unopened |
How much do you need?
| Pack | Area per coat |
|---|---|
| 5 kg | about 50–62 m² |
| 20 kg | about 200–250 m² |
Example: priming a 150 m² boundary wall needs about 12–15 kg per coat, so allow one 20 kg pack. Based on Terraco’s 0.08–0.10 kg/m²; very absorbent surfaces may need a second coat.
How to apply
- Scrape and brush off all dust, dirt and loose material. The surface must be free of salts, oil, grease and ridges.
- Protect adjacent surfaces.
- Repair cracks, chips and voids with a suitable Terraco repair compound.
- Apply liberally and evenly by brush or spray, and let it dry.
- Apply a second coat if the surface needs it.
- Apply the finish as soon as possible for the best adhesion. Clean tools with water.
Storage and safety
- Store in a clean, dry area away from direct sun and extreme heat or cold. Shelf life is 12 months unopened; use the oldest stock first.
- Avoid prolonged contact with skin and eyes, and see the safety data sheet for full details.
Frequently asked questions
Clear or pigmented?
Clear P Primer seals and binds without colouring the surface. P Primer Pigmented does the same job and also acts as a white or tinted undercoat.
Do I dilute it?
The data sheet doesn’t give a dilution. It is applied as supplied.
Which Terraco primer do I need?
| Primer | Type | Coverage | Use it when |
|---|---|---|---|
| P Primer Clear | Clear consolidation primer | 0.08–0.10 kg/m² | You need to seal and bind a dusty or absorbent surface without colouring it |
| P Primer Pigmented | Pigmented consolidation primer | 0.15–0.20 kg/m² | You also want a white or tinted undercoat |
| Tex Primer | Pigmented primer with mechanical key | 8–10 m²/L | Under Terracoat and other trowelled textured coatings |
| Terrabond A | Acrylic bonding agent | By dilution | Under screeds and repair mortars, or as a mortar additive |
Why surfaces need consolidating
Old renders and concrete that have stood in the UAE sun often turn powdery on the surface, and salts can bloom out as white efflorescence. Paint or texture applied straight onto that weak, dusty layer can lose adhesion and peel. P Primer Clear soaks in and binds the loose surface, reduces alkalinity and efflorescence, and gives the finish a sound base to bond to.
Quick surface test
- Rub test: rub the wall with your palm. If it leaves powder on your hand, the surface needs consolidating.
- Water drop test: splash a little water on. If it soaks in at once and darkens the wall, the surface is very absorbent and may need a second coat.
Application tips
- Apply in the shade or the cooler part of the day so the primer soaks in rather than flash-drying.
- Don’t over-apply to the point of a glossy film on the surface; the aim is penetration.
- Overcoat as soon as it is dry for the best adhesion.
Data sheet and related products
- P Primer Clear data sheet (PDF, Terraco UAE)
- P Primer Clear product page
- Terracoat textured coatings
- All Terraco products we supply
Technical data from the Terraco data sheet for P Primer Clear. Always check the latest data sheet before specifying.






Reviews
There are no reviews yet.