Terraco Handytex Interior Texture

Ready-mixed interior texturing compound. Supplied by Al Tashteb Al Saree, authorised Terraco distributor in Sharjah and Dubai.

SKU: ATS-TER-H1359 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco Handytex Interior Texture is Terraco’s ready-mixed acrylic texturing compound (code 62320) for interior ceilings and walls, rolled, brushed or combed into patterns that hide hairline cracks and minor blemishes. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Handytex from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is Handytex?

Handytex is a white, acrylic-based texturing compound of acrylic polymers, pigments, graded fillers and additives. You apply a generous coat and create the pattern with a stippling pad, brush or patterned roller. It is a quick way to give ceilings and walls a decorative finish while hiding hairline cracks and minor defects. Terraco lists it as non-combustible with Class 0 flame spread, and it can be tinted with universal colourants.

Patterns

  • Scroll: stippling pad in figure-of-eight movements
  • Broken leather: stippling pad covered in polythene, brush spun in opposite directions
  • Bark, diagonal and diamond effects: matching effect rollers
  • Diagonal knockdown: diagonal effect roller, then a knockdown tool

Where to use it

  • Interior ceilings and walls
  • Precast concrete, sand/cement render, gypsum plaster and drywall

Technical data

BinderAcrylic
Product code62320
ColourWhite (tintable with universal colourants)
Coverage0.6–1.2 kg/m²
ThinningWater if required, up to 10% for light textures
Drying3–4 hours; 12–24 hours before topcoating
Flame spreadClass 0
Packaging (data sheet)5 kg and 25 kg plastic pails
Shelf life12 months unopened

How much do you need?

PackArea
5 kgabout 4–8 m²
25 kgabout 21–42 m²

Example: texturing a 60 m² ceiling needs about 36–72 kg, so allow two or three 25 kg pails; heavier patterns use more. Based on Terraco’s 0.6–1.2 kg/m².

How to apply

  1. Prepare: new surfaces must be free of dust, salts, oil, grease and ridges; repair cracks and voids with Handycoat Exterior. Wash old surfaces with sugar soap, rinse and dry. Protect adjacent surfaces.
  2. Prime with Terraco Penetrating Primer.
  3. Stir well, and practise the texture on a board first.
  4. Apply a generous coat over about 1 m² at a time, then create the pattern with the texturing tool, keeping a wet edge.
  5. Finish ceiling-to-wall edges with a small brush to leave a smooth border about 15–30 mm wide.
  6. Allow 12–24 hours before topcoating with Ecotop, Ecotex, Fresco or Handyplus. Clean tools with water.

Don’t apply below 5 °C.

Storage and safety

  • Store in a clean, dry area away from direct sun and extreme heat or cold. Shelf life is 12 months unopened.
  • Avoid prolonged contact with skin and eyes, and see the safety data sheet for details.

Frequently asked questions

Does Handytex hide cracks?

It conceals hairline cracks and minor blemishes. Fill bigger cracks first.

Do I need to paint it?

It dries white. Terraco recommends topcoating with one of its emulsions (Ecotop, Ecotex, Fresco or Handyplus) after 12–24 hours.

Pattern and tool guide

PatternToolLook
ScrollStippling pad, figure-of-eight movementsSoft swirling texture
Broken leatherStippling pad covered in polythene, spun both waysCrinkled, leather-like
Bark effectBark effect rollerVertical, tree-bark texture
Diagonal effectDiagonal effect rollerRegular diagonal lines
Diamond effectDiamond effect rollerRepeating diamond pattern
Diagonal knockdownDiagonal roller, then knockdown toolFlattened, low-profile pattern

Where it works best

Handytex is a quick, economical way to give ceilings and walls character while hiding hairline cracks and minor defects. It is common on villa and apartment ceilings, corridors, stairwells and gypsum board ceilings in the UAE, where it saves the time and cost of a perfectly smooth skim.

Typical system

  1. Repair cracks and voids with Handycoat Exterior.
  2. Prime with Terraco Penetrating Primer.
  3. Apply Handytex and create the pattern, about 1 m² at a time.
  4. Leave a smooth 15–30 mm border at the ceiling-to-wall edge.
  5. After 12–24 hours, topcoat with Ecotop, Ecotex, Fresco or Handyplus.

Tips for a consistent pattern

  • Have one person apply and another texture, so the edge stays wet.
  • Keep the same tool, pressure and direction across the whole ceiling.
  • Thin with water only for light textures, up to 10%, and thin every batch the same.
  • Practise on a board before starting.

Data sheet and related products

Technical data from the Terraco data sheet for Handytex. Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top