Terraco Maxi 25 kg Tile Paste is Terraco’s ready-mixed acrylic paste tile adhesive for wall tiles and clinkers on concrete, plasterboard, gypsum, plywood and cement plaster, inside and outside. No mixing is needed. This listing is the 25 kg pack. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Maxi Tilepaste from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is Terraco Maxi Tilepaste?
Maxi Tilepaste is Terraco’s ready-mixed tile adhesive in paste form. There is no powder to mix and no water to measure: open the pail and start tiling. It is made from precisely graded crushed fillers, a styrene acrylate binder and additives that improve plasticity and adhesion. Terraco calls it “an economical, high quality, all-purpose acrylic adhesive for tiles and clinkers.”
Ready-mixed paste adhesives suit jobs where convenience and a clean site matter more than heavy-duty performance: bathroom and kitchen wall tiling in occupied homes, small refurbishments, and boards such as plasterboard and plywood, where a cement adhesive is less convenient. Because it comes ready to use, every batch has the same consistency and nothing goes to waste mixing more than you need.
Technical data
| Type | Ready-mixed acrylic (styrene acrylate) paste tile adhesive |
| Product code | 65610 |
| Colour | Buff |
| Bed thickness | Approx. 3 mm |
| Coverage | 1.5–3 kg/m², depending on tile and background |
| Fire | Class 0 to BS 476 Part 6 (as stated by Terraco) |
| Toxicity | Listed by Terraco as non-toxic |
| Packaging (data sheet) | 25 kg plastic pails |
| Shelf life | 12 months in unopened containers |
Where to use it
- Wall tiles and clinkers, interior and exterior.
- Fair-faced concrete and lightweight concrete.
- Plasterboard, gypsum walls, chipboard and plywood.
- Sand and cement plasters and screeds.
Not for prolonged wet areas
The data sheet says Maxi Tilepaste is not suitable for areas of prolonged saturation, such as floors and swimming pools. For those areas, Terraco says to add cement at 25% of the adhesive’s weight: make a slurry of 3 parts cement to 1 part water and blend it in thoroughly. For pools and wet floors, a cement-based adhesive such as Terrafix W11 or W22 is the simpler choice. Plan expansion joints at the design stage.
Preparing the surface
- The background must be level, solid, and free of dust, dirt, salts, oil, grease and ridges.
- Repair cracks, chips and voids first: Terraco Acrylic Filler for small defects, or Terramix repair mortar on cement-based backgrounds.
- Prime absorbent or porous backgrounds, and plasterboard, with Terraco Penetrating Primer.
How to apply
- Stir the paste in the pail.
- Spread a layer about 3 mm thick with the smooth side of a notched trowel, then comb it with the notched edge.
- Press and twist each tile into place for full contact.
- Fix tiles before the adhesive surface dries, and don’t spread more than you can tile before a skin forms. In hot, dry conditions, work in smaller areas.
- Wipe adhesive off tile faces with a wet sponge before it dries, and clean tools with water.
- Grout with Terragrout G11 once the adhesive has set.
How much do you need?
| Method | Consumption | Area per 25 kg |
|---|---|---|
| Notched trowel, approx. 3 mm bed | 1.5–3 kg/m² | 8.3–16.7 m² |
Example: a small bathroom wall (10 m²) uses about 15–30 kg, so allow 2 × 25 kg. Consumption rates are Terraco’s; areas are calculated from them. Uneven surfaces use more.
Storage, shelf life and safety
- Store in a clean, dry area away from direct sunlight and extreme heat and cold. Close the lid tightly between uses so the paste doesn’t skin over.
- Unopened containers keep for 12 months. Use the oldest stock first.
- Terraco lists the product as non-toxic, but avoid prolonged contact with eyes and skin. See the material safety data sheet for details.
Frequently asked questions
Do I need to mix anything?
No. Maxi Tilepaste is ready-mixed. Just stir and apply.
Can I use it in a shower or pool?
Not on its own. Terraco says it is not suitable for areas of prolonged saturation such as floors and pools, unless cement is added as described above. For pools, use a cement-based Terrafix adhesive.
Can I tile onto plasterboard or plywood?
Yes. Plasterboard, chipboard, plywood and gypsum walls are all listed as suitable. Prime plasterboard first with Terraco Penetrating Primer.
Maxi Tilepaste or Terrapaste?
Both are ready-mixed acrylic paste adhesives. Maxi Tilepaste is buff and listed for interior and exterior walls. Terrapaste is white, mainly for interior walls, and can also be used to grout joints. See our Terrapaste vs Maxi Tilepaste comparison.
Data sheet and related products
- Maxi Tilepaste technical data sheet (PDF, Terraco UAE)
- Maxi Tilepaste product page
- Terragrout G11 tile grout
- All Terraco products we supply
Technical data from the Terraco data sheet for Maxi Tilepaste (version 07.2009). Always check the latest data sheet before specifying.






Reviews
There are no reviews yet.