Terraco Handycoat ACP is a ready-to-use, lightweight anti-condensation skimming compound for interior walls. It is made from acrylic polymer and lightweight fillers, and is designed for the inside face of exterior walls, where cold bridging causes condensation, damp patches and mould. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Handycoat ACP from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
Why condensation happens, and how ACP helps
In UAE buildings, the problem usually runs the opposite way to cold climates. Outside, the air is hot and often humid; inside, air-conditioning keeps rooms cool. Where structural elements such as columns, beams or slab edges conduct heat or cold through the wall (a cold bridge), the inside surface can drop below the dew point of the room air, and moisture condenses on it. The result is damp patches, peeling paint and mould on particular walls and corners.
Handycoat ACP adds a lightweight, insulating skim layer to the wall. Terraco gives a thermal conductivity of 0.097 W/m·K, much lower than dense plasters, so the wall surface stays closer to room temperature. The compound is also fungal resistant and vapour permeable. Terraco states it is 40% lighter than conventional skimcoats, with lower shrinkage and quick drying.
Where to use it
- Interior skimming, especially on the inside face of exterior walls affected by condensation
- Gypsum board, sand/cement render and cement fibre board
- Precast and in-situ concrete
- Previously painted surfaces
Condensation and damp can have other causes too, such as leaks, rising damp or poor ventilation. ACP treats the surface; fix leaks and other sources first.
Technical data
| Type | Ready-to-use anti-condensation skimming compound |
| Product code | 63167 |
| Binder | Acrylic copolymer |
| Fillers | Fine, precisely graded lightweight fillers |
| Specific gravity | 1.09 |
| Thermal conductivity | 0.097 W/m·K |
| Solids content | 62% ± 1 |
| Layer thickness | 2–5 mm |
| Coverage | 2–3 kg/m² (1.5–2.5 mm) |
| Packaging | 4 kg and 18 kg containers |
| Shelf life | 12 months unopened |
| Toxicity | Non-toxic (per Terraco) |
Preparing the surface
- Scrape and brush away dust, dirt and foreign matter.
- Make sure the surface is free of salts, oil, grease and ridges.
- Protect surfaces that aren’t being coated.
- Apply Terraco Penetrating Primer on dusting surfaces.
- Treat any existing mould before skimming, and let the wall dry.
How to apply
- Stir well. Thin with a little water only if needed.
- Apply in a thin, even layer.
- For thicker build, apply several thin layers, letting each dry before the next, within the 2–5 mm range.
- Lightly sand the final surface before painting, within 24 hours of application.
- Paint with a suitable interior emulsion.
- Clean tools with water.
How much do you need?
| Pack | Approx. area (2–3 kg/m², 1.5–2.5 mm) |
|---|---|
| 4 kg | 1.3–2 m² |
| 18 kg | 6–9 m² |
Example: treating a 3 m × 3 m external bedroom wall (9 m²) needs about 18–27 kg, so allow 2 × 18 kg. Areas are calculated from Terraco’s coverage figure.
Storage and safety
- Store in a clean, dry area away from direct sunlight and extreme heat and cold. Unopened containers keep for 12 months; use the oldest first.
- Avoid prolonged contact with eyes and skin, and see the safety data sheet.
Frequently asked questions
Will ACP stop condensation completely?
It reduces the cold-surface effect that causes condensation by adding a lightweight, low-conductivity layer. Ventilation, humidity control and fixing cold bridges at source also matter.
Can I apply it over painted walls?
Yes. Terraco lists previously painted surfaces as suitable, once clean and sound.
How thick?
2–5 mm, built up in thin layers.
Is it mould resistant?
Terraco describes it as fungal resistant.
Data sheet and related products
- Handycoat ACP data sheet (PDF, Terraco)
- Handycoat ACP product page and condensation guide
- All Terraco products we supply
Technical data from the Terraco data sheet for Handycoat ACP (version 07.2013). Always check the latest data sheet before specifying.






Reviews
There are no reviews yet.