Terraco Styrobond DP EIFS Adhesive and Basecoat is Terraco’s cement-based adhesive and basecoat (code 75410) for the Terraco EIFS external insulation system, used to fix insulation boards and to embed the reinforcing mesh. The data sheet lists 25 kg sacks. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Styrobond DP from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is Styrobond DP?
Styrobond DP is a fine grey powder of cement minerals, organic binders and additives. On a Terraco EIFS facade it does two jobs: as an adhesive it bonds EPS insulation boards to mineral walls, and as a basecoat (embedding mortar) it is troweled over EPS, XPS or mineral wool boards to bed the glass-fibre mesh before the primer and finish coat. Terraco lists it as water-resistant, with excellent adhesion, good flexural strength and good impact resistance.
In the Terraco EIFS build-up, boards are typically fixed with Styrofix adhesive and mechanical fixings, then Styrobond DP with Terramesh forms the reinforced basecoat at 3–5 mm overall. Terraco’s Terol and Terracoat data sheets also name Styrobond DP for repairing surface defects before the finish.
Where to use it
- Adhesive between mineral substrates and EPS boards
- Embedding mortar for glass-fibre mesh over EPS, XPS and mineral wool boards
- Part of the Terraco EIFS Alpha, Polar and Perma systems
Technical data
| Type | Cement-based EIFS adhesive and basecoat (powder) |
| Product code | 75410 |
| Colour | Grey |
| Mixing | About 4 parts powder to 1 part water by weight |
| Pot life (25 °C) | 3 hours |
| Consumption | 4–5 kg/m² |
| Basecoat thickness | 3–5 mm overall, mesh fully embedded |
| Testing reference | EOTA ETAG 004 |
| Packaging | 25 kg paper sacks |
| Shelf life | 12 months unopened |
Mixing
- Add the powder to clean water at about 4:1 by weight, roughly 6.25 litres of water per 25 kg sack (our calculation).
- Mix with a high-speed mixer for 3–5 minutes, rest 5 minutes, then remix.
- Mix only enough for immediate use; pot life is about 3 hours at 25 °C.
Application
As adhesive: apply to the EPS board, press it into place against a straight edge, and fix it before the adhesive skins.
As basecoat: trowel a coat onto the boards and embed the glass-fibre mesh into it. Apply a second coat to cover the mesh completely, for an overall thickness of 3–5 mm. Clean tools with water.
How much do you need?
Terraco gives a single figure of 4–5 kg/m², so one 25 kg sack covers about 5–6 m². For a 100 m² facade that means about 400–500 kg, or 16–20 sacks, for that coat. The data sheet doesn’t split the figure between adhesive and basecoat use, so for a full EIFS take-off send us the drawings and we’ll check quantities with Terraco.
Storage and safety
- Store in a clean, dry area away from direct sun and extreme heat or cold. Shelf life is 12 months unopened; use the oldest stock first.
- Avoid prolonged contact with skin and eyes, and see the safety data sheet for full details.
Frequently asked questions
Can I use Styrobond DP on XPS or mineral wool?
Yes, as the embedding basecoat. As an adhesive, the data sheet lists it for EPS boards on mineral substrates.
How thick is the basecoat?
3–5 mm overall, in two passes with the mesh embedded.
Data sheet and related products
- Styrobond DP data sheet (PDF, Terraco UAE)
- Styrobond DP product page
- Terraco EIFS Alpha (EPS) system
- All Terraco products we supply
Technical data from the Terraco data sheet for Styrobond DP. Always check the latest data sheet before specifying.






Reviews
There are no reviews yet.