Terraco P Primer Clear

Clear penetrating primer for dusty surfaces. Supplied by Al Tashteb Al Saree, authorised Terraco distributor in Sharjah and Dubai.

SKU: ATS-TER-H1380 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco P Primer Clear is Terraco’s clear, deep-penetrating surface consolidation primer (code 68110) for binding dusty, absorbent concrete, render and plaster before decorative finishes. The data sheet lists 5 kg and 20 kg containers. Al Tashteb Al Saree is an authorised Terraco distributor, supplying P Primer Clear from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is P Primer Clear?

P Primer Clear is an aqueous acrylic copolymer primer that soaks deep into cementitious surfaces, plasters and limes and binds them, giving a solid base for Terraco textured coatings, paints and thin-layer mortars. Terraco lists it as improving adhesion, binding dusting substrates, and reducing efflorescence and surface alkalinity.

It is especially suited to sealing old, dry, absorbent, untreated concrete, a common condition on UAE facades and boundary walls that have stood unpainted in the sun. Terraco recommends it before all decorative finishes on concrete, blockwork, cement renders and Terraco EIFS.

Where to use it

  • Interior and exterior surfaces
  • Sand/cement render
  • Cast in-situ, precast and lightweight concrete
  • Blockwork
  • Terraco EIFS basecoats

Technical data

TypeAqueous acrylic copolymer emulsion
Product code68110
AppearanceClear
Viscosity (23 °C)500 cps
pH8–8.5
Specific gravity1.02
Coverage0.08–0.10 kg/m², depending on the surface
Packaging (data sheet)5 kg and 20 kg containers
Shelf life12 months unopened

How much do you need?

PackArea per coat
5 kgabout 50–62 m²
20 kgabout 200–250 m²

Example: priming a 150 m² boundary wall needs about 12–15 kg per coat, so allow one 20 kg pack. Based on Terraco’s 0.08–0.10 kg/m²; very absorbent surfaces may need a second coat.

How to apply

  1. Scrape and brush off all dust, dirt and loose material. The surface must be free of salts, oil, grease and ridges.
  2. Protect adjacent surfaces.
  3. Repair cracks, chips and voids with a suitable Terraco repair compound.
  4. Apply liberally and evenly by brush or spray, and let it dry.
  5. Apply a second coat if the surface needs it.
  6. Apply the finish as soon as possible for the best adhesion. Clean tools with water.

Storage and safety

  • Store in a clean, dry area away from direct sun and extreme heat or cold. Shelf life is 12 months unopened; use the oldest stock first.
  • Avoid prolonged contact with skin and eyes, and see the safety data sheet for full details.

Frequently asked questions

Clear or pigmented?

Clear P Primer seals and binds without colouring the surface. P Primer Pigmented does the same job and also acts as a white or tinted undercoat.

Do I dilute it?

The data sheet doesn’t give a dilution. It is applied as supplied.

Which Terraco primer do I need?

PrimerTypeCoverageUse it when
P Primer ClearClear consolidation primer0.08–0.10 kg/m²You need to seal and bind a dusty or absorbent surface without colouring it
P Primer PigmentedPigmented consolidation primer0.15–0.20 kg/m²You also want a white or tinted undercoat
Tex PrimerPigmented primer with mechanical key8–10 m²/LUnder Terracoat and other trowelled textured coatings
Terrabond AAcrylic bonding agentBy dilutionUnder screeds and repair mortars, or as a mortar additive

Why surfaces need consolidating

Old renders and concrete that have stood in the UAE sun often turn powdery on the surface, and salts can bloom out as white efflorescence. Paint or texture applied straight onto that weak, dusty layer can lose adhesion and peel. P Primer Clear soaks in and binds the loose surface, reduces alkalinity and efflorescence, and gives the finish a sound base to bond to.

Quick surface test

  • Rub test: rub the wall with your palm. If it leaves powder on your hand, the surface needs consolidating.
  • Water drop test: splash a little water on. If it soaks in at once and darkens the wall, the surface is very absorbent and may need a second coat.

Application tips

  • Apply in the shade or the cooler part of the day so the primer soaks in rather than flash-drying.
  • Don’t over-apply to the point of a glossy film on the surface; the aim is penetration.
  • Overcoat as soon as it is dry for the best adhesion.

Data sheet and related products

Technical data from the Terraco data sheet for P Primer Clear. Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top