Terraco Terrafix W11 Tile Adhesive (C1T) is Terraco’s C1T non-slump wall tile adhesive (EN 12004) for ceramic tiles and glass mosaic on interior and exterior walls and in concrete swimming pools. It comes in grey and white, in 20 kg and 25 kg bags. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terrafix W11 from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is Terraco Terrafix W11?
Terrafix W11 is Terraco’s non-slump, cement-based wall tile adhesive. It is made with hydraulic and organic binders, plasticisers, adhesion promoters and water-retaining agents, and it meets EN 12004, passing the tests for class C1T. In plain terms, it is a dependable general-purpose adhesive for fixing ceramic tiles and glass mosaic to walls, inside and outside, and it is one of the adhesives Terraco names for fixing ceramic and glass mosaic tiles in concrete swimming pools.
Because it is non-slump, tiles stay where you place them on a vertical wall instead of sliding down while the adhesive sets. That makes W11 a common choice for bathroom and kitchen walls, washroom blocks, facades with ceramic cladding and pool walls on villa and building projects across the UAE.
What does C1T mean?
EN 12004 is the European standard for tile adhesives, and the class code tells you how an adhesive performs:
- C: cementitious adhesive (a powder mixed with water).
- 1: normal adhesion. Terraco’s data sheet gives tensile adhesion above 0.5 N/mm² (EN 1348), measured initially, after heat ageing, after water immersion and after freeze/thaw cycles.
- T: reduced slip, which is what “non-slump” means on a wall.
Adhesives classed C2 have improved adhesion, and an E means extended open time. If your job needs those, look at Terrafix W22 (C2TE).
Technical data
| Classification | C1T to EN 12004 |
| Colours | Grey (product code 75540) and white (75545) |
| Tensile adhesion (EN 1348) | > 0.5 N/mm² standard, after heat ageing, after water immersion and after freeze/thaw |
| Mixing water | 28–30%: 5.6–6.0 L per 20 kg bag, 7.0–7.5 L per 25 kg bag |
| Open time | More than 20 minutes |
| Adjustability | More than 30 minutes |
| Pot life | 2 hours (the data sheet also says to use mixed material within 1 hour; follow the shorter time) |
| Bed thickness | Approx. 3 mm |
| Application temperature | 5 °C to 35 °C |
| Ready to grout | 24 hours |
| Ready for use | 14 days |
| Packaging | 20 kg and 25 kg bags |
| Shelf life | 12 months in the original unopened bag |
Where to use it
- Ceramic wall tiles and glass mosaic, interior and exterior.
- Concrete swimming pools (ceramic and glass mosaic).
- Dimensionally stable masonry backgrounds, such as sand/cement render and precast concrete.
For gypsum board, painted walls and other demanding backgrounds, and for larger, heavier tiles, an improved-adhesion C2 adhesive such as Terrafix W22 is the safer choice. Plan expansion joints at the design stage, as the data sheet advises.
Preparing the surface
- Make sure the wall is sound, clean and free of dust, oil, loose material and anything that could stop the adhesive bonding.
- Wet absorbent or porous backgrounds thoroughly before tiling, so the wall doesn’t pull water out of the adhesive. This matters in UAE heat, when blockwork and render dry out fast.
- Treat dusting surfaces with a penetrating primer.
Mixing and fixing
- Add the powder to clean water: 5.6–6.0 litres per 20 kg bag, or 7.0–7.5 litres per 25 kg bag.
- Mix to a thick, creamy consistency. Leave it to stand for 5 minutes, then mix again.
- Spread a layer about 3 mm thick with the smooth side of a notched trowel, then comb it with the notched edge.
- Press the tiles firmly into the adhesive for full contact, before its surface skins over. Use spacers for even joints.
- Work only in the 5–35 °C range. On hot days, mix smaller batches and tile in the cooler hours.
- Grout after 24 hours with Terragrout G11. The tiled area is ready for use after 14 days.
- Clean tools with water straight after use.
How much do you need?
| Method | Consumption | Area per 20 kg | Area per 25 kg |
|---|---|---|---|
| No. 4 notched trowel | 2–2.5 kg/m² | 8.0–10.0 m² | 10.0–12.5 m² |
| No. 5 notched trowel | 2.5–3 kg/m² | 6.7–8.0 m² | 8.3–10.0 m² |
| No. 6 notched trowel | 4–6 kg/m² | 3.3–5.0 m² | 4.2–6.2 m² |
Example: a bathroom wall tiled with a No. 5 trowel (20 m²) uses about 50–60 kg, so allow 3 × 20 kg or 3 × 25 kg. Consumption rates are Terraco’s; areas are calculated from them. Uneven surfaces use more.
Storage, shelf life and safety
- Store bags in a clean, dry place, away from humidity, moisture, direct sun and extreme heat or cold. In summer, keep them out of site containers and off hot slabs.
- Shelf life is 12 months in the original unopened bag. Use the oldest stock first.
- Avoid prolonged contact with eyes and skin, and wear gloves and eye protection when mixing. See the material safety data sheet for full details.
Frequently asked questions
Can I use Terrafix W11 on floors?
Terraco describes W11 as a wall tile adhesive. For floors, ask us which Terrafix grade suits your tiles and background.
Can I use it in a swimming pool?
Yes. Terraco names W11 for fixing ceramic and glass mosaic tiles to concrete swimming pools.
Grey or white?
Grey is the usual choice for standard ceramic tiles. White is commonly chosen for glass mosaic and light-coloured or translucent tiles, where grey adhesive could show through or darken the grout lines.
How long before I can grout?
24 hours after fixing. The area is ready for use after 14 days.
How much water do I add?
5.6–6.0 litres per 20 kg bag, or 7.0–7.5 litres per 25 kg bag. Don’t add extra water to loosen adhesive that has started to stiffen; mix a fresh batch instead.
Data sheet and related products
- Terrafix W11 technical data sheet (PDF, Terraco UAE)
- Terrafix W11 product page
- Terrafix W22 vs W11: which tile adhesive?
- Terragrout G11 tile grout
- All Terraco products we supply
Technical data from the Terraco UAE data sheet for Terrafix W11 (version 09.2014). Always check the latest data sheet before specifying.






Reviews
There are no reviews yet.