Terraco Handycoat Gypsum Joint Compound – 5 Kg is Terraco’s ready-mixed, quick-drying joint compound and skim coat for taping gypsum board joints and smoothing interior walls before painting. This listing is the 5 kg pack. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Handycoat Gypsum Joint Compound from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is Terraco Handycoat Gypsum Joint Compound?
Handycoat Gypsum Joint Compound is Terraco’s ready-mixed, quick-drying jointing compound and skim coat. It is based on a vinyl co-polymer binder with graded marble and inert extenders. It does two jobs on interior drywall and plaster: it fills and tapes the joints between gypsum boards, and it skims whole surfaces smooth before painting. Terraco describes it as vapour permeable, fast drying, easy to sand, well adhering, and not liable to flake off, with negligible shrinkage.
Gypsum board partitions and ceilings are now standard in UAE villas, apartments and fit-outs. How well the joints are taped and finished decides whether the painted wall looks seamless or shows lines and screw heads. A ready-mixed compound gives the same consistency from the first pail to the last, with no powder to measure on site.
Where to use it
- Taping and finishing joints in gypsum board walls and ceilings
- Cement boards
- Concrete walls and plastered blockwork
- Skim coat on most interior building surfaces, including sand/cement render
- Filling hairline cracks and smoothing old or new interior surfaces before painting
Interior use. Stabilise surfaces that flake or dust with Terraco Penetrating Primer first. Don’t mix it with any other product.
Technical data
| Type | Ready-mixed, quick-drying gypsum joint compound and skim coat |
| Product code | 63290 |
| Binder | Vinyl co-polymer |
| Fillers | Graded marble and inert extenders |
| Colour | White |
| Density | 1.75 |
| Shrinkage | Negligible |
| Toxicity | Non-toxic (per Terraco) |
| Coverage, as joint compound | About 70 m² per 28 kg |
| Coverage, as skim coat | 25–35 m² per 28 kg, depending on the surface |
| Packaging | 5 kg and 28 kg plastic pails |
| Shelf life | 12 months unopened |
Preparing the surface
- Brush away dust, dirt and foreign matter.
- Remove ridges, form oil, and paper or gypsum burrs from cut board edges.
- Drive home any screw heads that stand proud.
- On old painted surfaces, wash with a soda and water solution, rinse, and let dry.
How to tape and finish board joints
- Stir the compound well. Thin with a little water only if needed.
- First coat: fill the vertical and horizontal joints and embed jointing tape into this first layer. Spread it about 150 mm wide and level it out.
- Second coat: when dry, apply a second coat about 200 mm wide.
- Third coat: when dry, apply a final coat about 275 mm wide and feather the edges so the joint disappears.
- Internal corners: fold the tape to a right angle and build up the same layers.
- Screw heads: give them the same number of coats as the joints.
- When the final coat is dry, sand lightly and remove all dust before priming and painting.
- Clean tools with water.
The three widening coats are what make a joint invisible under paint. Each coat spreads the build over a wider area, so there is no hump for side light to catch.
How much do you need?
| Use | Per 5 kg pail | Per 28 kg pail |
|---|---|---|
| Joint compound (taping) | about 12.5 m² | about 70 m² |
| Skim coat | about 4.5–6.3 m² | 25–35 m² |
The 28 kg figures are Terraco’s; the 5 kg figures are scaled from them. Example: taping a 140 m² gypsum partition (both faces) needs about 2 × 28 kg pails; skimming the same area all over would need about 4–6.
Storage and safety
- Store in a clean, dry area away from direct sunlight and extreme heat and cold. Keep the lid tight between uses.
- Unopened pails keep for 12 months. Use the oldest stock first.
- Avoid prolonged eye and skin contact, and see the safety data sheet.
Frequently asked questions
Do I need jointing tape?
Yes, for board joints. Terraco’s method embeds jointing tape in the first coat.
Can I skim a whole wall with it?
Yes. It is a skim coat as well as a joint compound, covering about 25–35 m² per 28 kg.
Can I use it outside?
It is for interior surfaces. Outside, use Handycoat Exterior.
Joint compound or Interior Stucco Putty?
Use the joint compound for taping board joints and general skimming. For an extra-fine final skim before paint, up to 1 mm, use Handycoat Interior Stucco Putty.
Data sheet and related products
- Handycoat Gypsum Joint Compound data sheet (PDF, Terraco UAE)
- Handycoat Gypsum Joint Compound product page and how-to guide
- All Terraco products we supply
Technical data from the Terraco UAE data sheet for Handycoat Gypsum Joint Compound. Always check the latest data sheet before specifying.


Reviews
There are no reviews yet.