Terraco Antique Stucco Venetian Plaster

High-gloss Venetian marble effect. Supplied by Al Tashteb Al Saree, authorised Terraco distributor in Sharjah and Dubai.

SKU: ATS-TER-H1384 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco Antique Stucco Venetian Plaster is Terraco’s acrylic-based Venetian stucco paste (code 62330) for interior walls, giving a translucent, high-gloss marble effect. The data sheet lists 6 kg and 15 kg pails. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Antique Stucco from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is Antique Stucco?

Antique Stucco is a ready-to-use paste of acrylic binder, inert fillers and pigments. Built up in thin coats with a spatula and burnished with a steel blade as it dries, it gives the deep, polished look of marble. Depending on how it is applied, it can give a traditional Venetian stucco or a contemporary patchwork effect. Terraco lists it as non-combustible with Class 0 flame spread (ASTM E84-95b), and suggests it for restaurants, galleries and hotel lobbies.

Technical data

TypeAcrylic-based Venetian stucco paste
Product code62330
FinishTranslucent, high-gloss polished marble effect
Consumption0.5–1.2 kg/m², depending on the effect
Drying time30–60 minutes
Flame spreadClass 0 (ASTM E84-95b)
Specific gravity1.45–1.50
ColoursTintable with Terraco one-shot colourant paste
Packaging (data sheet)6 kg and 15 kg plastic pails
Shelf life12 months unopened

How much do you need?

PackArea
6 kgabout 5–12 m²
15 kgabout 12.5–30 m²

Example: a 30 m² lobby wall needs about 15–36 kg, so allow one to three 15 kg pails, depending on the effect and number of coats. Based on Terraco’s 0.5–1.2 kg/m².

How to apply

  1. Prepare: new surfaces must be free of dust, salts, oil, grease and ridges; repair cracks and voids with Handycoat Exterior. Wash old surfaces with sugar soap, rinse and dry. Protect adjacent areas.
  2. Level with a Handycoat trowel coat if needed, then prime with Terraco Penetrating Primer.
  3. Venetian effect: apply the first coat with a wide trowel, then build up thin coats with a fine-blade spatula. You can vary the colour between coats. While it dries, polish with a white steel blade until you reach the sheen you want.
  4. Contemporary effect: apply by spatula in a patchwork pattern to use the product’s translucency, then polish with a buffing cloth as it dries.
  5. Clean tools with water.

Storage and safety

  • Store in a clean, dry area away from direct sun and extreme heat or cold. Shelf life is 12 months unopened.
  • Avoid prolonged contact with skin and eyes, and see the safety data sheet for details.

Frequently asked questions

Antique Stucco or Terravertine?

Antique Stucco is a ready-mixed acrylic paste with a high-gloss marble look. Terravertine is a lime-based powder plaster with a natural-stone polished finish.

Can it be tinted?

Yes, with Terraco one-shot colourant paste. Send us the shade you want.

Antique Stucco vs Terravertine

Antique StuccoTerravertine
TypeReady-mixed acrylic pasteLime-based powder plaster
FinishTranslucent, high-gloss marble effectNatural stone polished finish, smooth or textured
Consumption0.5–1.2 kg/m²Finishcoat 1.5–2 kg/m²; basecoat 1.5 kg/m² per mm
Drying30–60 minutes48 hours before waxing
Packs6 kg and 15 kg pails25 kg basecoat; 15 kg finishcoat

Where it works best

Antique Stucco is an interior feature finish for hotel lobbies, restaurants, galleries, majlis rooms, reception areas and villa feature walls. The polished surface reflects light and gives depth that paint can’t, and because it is ready-mixed and dries in under an hour, coats can be built up in a single working day.

Getting a professional finish

  • The substrate must be very smooth: level it with a Handycoat skim first, as Terraco suggests, and sand out marks.
  • Prime with Penetrating Primer so absorption is even.
  • Use a stainless or white steel trowel and keep it clean to avoid grey marks.
  • Apply thin coats; heavy coats lose the translucent depth.
  • Burnish while the coat is still drying, not after it has fully dried.
  • Prepare a sample board first to agree the colour and effect with the client.

Data sheet and related products

Technical data from the Terraco data sheet for Antique Stucco. Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top