Terraco Handycoat Interior Stucco Putty – 1 L

Terraco Handycoat Interior Stucco Putty – 1 L, available from Al Tashteb Al Saree in Bu-Tina, Sharjah. Ask for price and stock on WhatsApp or call us.

WhatsApp usCall now

SKU: ATS-TER-N003684 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco Handycoat Interior Stucco Putty – 1 L is Terraco’s ready-mixed, quick-drying acrylic filler and skim coat for an extra-fine finish on interior walls and ceilings before painting. This listing is the 1 L pack. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Handycoat Interior Stucco Putty from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is Terraco Handycoat Interior Stucco Putty?

Handycoat Interior Stucco Putty is Terraco’s ready-mixed, quick-drying acrylic copolymer filler and skim coat for interior walls and ceilings. It is white and made with fine, precisely graded fillers, so it gives an extra-fine surface for paint. Terraco lists it as easy to use, resistant to flaking, strongly adhesive, high coverage and vapour permeable.

It is the finishing putty. Where a joint compound or plaster does the levelling, Interior Stucco Putty goes on last, in layers of no more than 1 mm, to close pinholes, scratches and fine texture, so emulsion paint dries to a smooth, even sheen. On walls that will be painted in silk or semi-gloss, or lit by downlights or sunlight across the wall, that last fine skim is what hides the flaws.

Where to use it

  • Repairing and touching up old and new interior surfaces before painting
  • Skimming over other Handycoat and Sprayplaster grades for a fine finish
  • Cementitious surfaces and sand/cement render
  • Gypsum, gypsum boards and sprayplasters
  • Wood, and most common interior building surfaces

Interior use only, with a maximum layer of 1 mm. For exterior walls, use Handycoat Exterior.

Technical data

TypeReady-mixed, quick-drying interior filler and skim coat
Product code63295
BinderAcrylic copolymer
ColourWhite
Specific gravity1.75 ± 0.05
ShrinkageNegligible
Maximum layer thickness1 mm
Coverage0.2–0.4 kg/m², depending on the surface
Packaging (data sheet)1 kg cup, 5 kg pail, 18 L pail
Shelf life12 months unopened; don’t let it freeze

Preparing the surface

  1. Brush away dust, dirt and foreign matter.
  2. Remove ridges and form oil.
  3. Prime dusting or flaking surfaces with Terraco P Primer.

How to apply

  1. Stir well. Thin with a little water only if needed.
  2. Apply a thin, even layer with a steel trowel or spatula, no more than 1 mm.
  3. For a flawless surface, apply two or more thin coats, letting each dry before the next.
  4. Lightly sand the final coat before painting, preferably within 24 hours of application.
  5. Remove sanding dust and paint.
  6. Clean tools with water.

Tip: check the skimmed wall with a work light held flat against the surface before you paint. Low-angle light shows ridges and hollows that are invisible head-on, and it is quicker to fix them now than after the first coat of paint.

How much do you need?

PackApprox. area per coat (0.2–0.4 kg/m²)
1 kg2.5–5 m²
5 kg12.5–25 m²
18 L (≈ 31.5 kg)79–158 m²

The 18 L figure is converted using Terraco’s specific gravity of 1.75. Example: skimming the walls of a 4 × 4 m bedroom (about 40 m² of wall) in two coats uses about 16–32 kg, so a single 18 L pail is enough.

Storage and safety

  • Store in a clean, dry area away from direct sunlight and extreme heat and cold. Don’t let it freeze. Close the lid tightly after use.
  • Unopened containers keep for 12 months. Use the oldest first.
  • Listed by Terraco as non-toxic, but avoid prolonged eye and skin contact, and see the safety data sheet.

Frequently asked questions

How thick can I apply it?

No more than 1 mm per layer. For deeper repairs, use a joint compound or filler first and finish with stucco putty.

Can I use it on gypsum board?

Yes. Gypsum and gypsum boards are listed as suitable.

When should I sand it?

Preferably within 24 hours of application, while it is easiest to sand.

Can I use it outside?

No, it is for interiors only. Use Handycoat Exterior outside.

Data sheet and related products

Technical data from the Terraco UAE data sheet for Handycoat Interior Stucco Putty. Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top