Terraco EIFS Alpha (EPS) System

EPS external insulation system. Supplied by Al Tashteb Al Saree, authorised Terraco distributor in Sharjah and Dubai.

SKU: ATS-TER-H1375 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco EIFS Alpha (EPS) System is Terraco’s external insulation and finish system built on expanded polystyrene (EPS) or graphite-enhanced G-EPS boards. Terraco describes it as its best-selling EIFS system, used for new build and renovation. Al Tashteb Al Saree is an authorised Terraco distributor, supplying EIFS Alpha components from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for a system quote on WhatsApp or call +971 52 510 4678.

What is EIFS Alpha?

An EIFS (exterior insulation and finish system) wraps the outside of a building in insulation boards, then covers them with a mesh-reinforced basecoat and a decorative finish. Insulating the outside of the wall keeps the sun’s heat out of the structure, which matters in the UAE, where most of a building’s energy goes on air-conditioning. Alpha is the EPS version of Terraco’s system. With G-EPS boards, Terraco states about 10% more thermal efficiency than standard EPS.

System build-up

  1. Adhesive: Styrofix, at 4–5 kg/m² (spot or notched trowel) or 5–6 kg/m² (ribbon and dab)
  2. Insulation: EPS or G-EPS boards, standard size 600 × 1200 mm, thickness chosen for the required U-value
  3. Mechanical fixing: plastic fasteners with plastic or steel pin dowels
  4. Basecoat: Styrobond DP with Terramesh glass-fibre mesh, 3–5 mm overall
  5. Primer: Terraco P Primer
  6. Finish: Terracoat, Terralite or Terol decorative coating

Thermal performance

BoardThermal conductivity (K)U-value at 100 mm
EPS0.033 W/(m·K)0.33 W/(m²·K)
G-EPS (graphite)0.030 W/(m·K)0.30 W/(m²·K)

Terraco’s U-value tables cover 50, 100, 150 and 200 mm boards. The values are indicative and vary with board density and specification, so your consultant should confirm the thickness needed for the project.

Fire safety

Terraco’s guidance is to use fire-retardant boards that comply with national regulations. In the UAE, facade systems must meet the UAE Fire and Life Safety Code, so confirm the specification with your consultant and Civil Defence before ordering. Where a higher fire rating is required, Terraco recommends its mineral wool system, EIFS Perma.

Guarantee and approvals

The system is covered by the Terraco International Guarantee when it is finished with a listed Terraco decorative coating and installed by an Approved Terraco EIFS Applicator. Terraco lists approvals for its EIFS range including EOTA ETAG 004, BBA, NSAI and UAE approvals.

Where to use it

  • New villas, apartment buildings, schools and commercial buildings
  • Renovating and insulating existing facades
  • Projects targeting better energy performance under green building rules

Frequently asked questions

Alpha, Polar or Perma?

Alpha (EPS) is the general-purpose system. Polar (XPS) suits hot, humid climates with air-conditioned interiors and areas needing thinner, tougher insulation. Perma (mineral wool) is for a higher fire rating or breathable walls.

Can you quote a full system?

Yes. Send the elevations or wall area, required U-value and finish on WhatsApp, and we’ll put together the components with Terraco.

Alpha vs Polar vs Perma at a glance

AlphaPolarPerma
InsulationEPS / graphite G-EPSXPSMineral wool
Thermal conductivity0.033 / 0.030 W/(m·K)0.030 W/(m·K)0.040 W/(m·K)
U-value at 100 mm0.33 / 0.30 W/(m²·K)0.30 W/(m²·K)0.40 W/(m²·K)
FinishesTerracoat, Terralite, TerolTerracoat, Terralite, TerolBreathable only: Terracoat Sil or Terol
Best forGeneral new build and renovationHot, humid, air-conditioned buildingsHigher fire rating, breathable walls

Figures are from the Terraco EIFS brochure and are indicative.

EPS or graphite G-EPS?

Standard white EPS is the economical choice. Grey graphite-enhanced G-EPS insulates about 10% better according to Terraco, so you can reach the same U-value with a thinner board, which helps keep window reveals shallow. G-EPS boards absorb more heat from the sun before they are covered, so keep them shaded on site and get the basecoat on promptly.

Material quantities per m² (guide)

LayerGuide quantity
Styrofix adhesive4–5 kg/m² (spot or notched trowel) or 5–6 kg/m² (ribbon and dab)
Insulation board1 m² plus wastage; 600 × 1200 mm boards
Styrobond DP basecoat4–5 kg/m² at 3–5 mm
Terramesh1 m² plus overlaps and corner patches
Primer and finishAs per the chosen Terraco finish data sheet

Quantities from the Terraco brochure and data sheets; confirm them for your project with us and Terraco.

Good practice on site

  • Fix boards in a staggered bond with tight joints, and fill gaps with insulation, not adhesive.
  • Add diagonal mesh patches at the corners of windows and doors to prevent cracking.
  • Use reinforced mesh or extra basecoat on lower, impact-prone areas.
  • Installation by an Approved Terraco EIFS Applicator is a condition of the Terraco International Guarantee.

Data sheets and related products

System details from the Terraco EIFS brochure. Always check the latest Terraco documentation before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top