Terraco Terramix Coarse and Standard are ready-mixed, polymer-modified repair mortars and thin-layer plasters for concrete, blockwork and brickwork, inside and out. Coarse builds 5–15 mm per layer and Standard 3–5 mm, giving a hard, smooth, water-resistant surface for paint or wallpaper. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terramix from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is Terramix?
Terramix is Terraco’s family of ready-mixed repair mortars: a powder of hydraulic and organic binders, washed and graded sand or quartz, plasticisers, adhesion promoters and water-retaining agents, formulated for plastering and repairing cast in-situ concrete and masonry. It also serves as the basecoat in the Terraco spray plastering system. The grades differ by aggregate size, and so by how thick you can apply them:
| Grade | Layer thickness | Mixing water per 25 kg | Codes (grey / white) |
|---|---|---|---|
| Coarse | 5–15 mm | 5.5–6.0 L | 77180 / 77185 |
| Standard | 3–5 mm | 6.0–6.5 L | 77160 / 77165 |
| Fine | 1–3 mm | 6.0–6.5 L | 77130 / 77150 |
Coarse is for filling deeper hollows, rebuilding damaged corners and levelling badly uneven walls. Standard is for general levelling and repair. Fine is for the final skim.
Where to use it
- Cast in-situ, lightweight and fair-faced dense concrete
- Concrete blockwork and brickwork
- Interior and exterior walls and ceilings, before paint or wallpaper
- Basecoat in Terraco spray plastering
Technical data
| Consumption | About 1.8 kg/m² per mm |
| Adhesion | > 0.5 N/mm² |
| Shrinkage (ASTM C157) | Max 0.13% |
| Colours | Grey and white |
| Packaging | 25 kg paper bags |
| Shelf life | 6 months unopened |
How to apply
- Surfaces must be free of dust, grease, oil and paint. Dampen very absorbent or porous backgrounds.
- In extreme climates or on very absorbent surfaces, prime, or add Terrabond A to the mixing water at 1:15 as Terraco recommends.
- Mix a 25 kg bag with the water shown above for 3–5 minutes, leave for 5 minutes, then re-stir.
- Trowel on and level with a steel float. Once set, smooth with a moistened wooden or foam float, then brush off loose particles when dry.
- Don’t leave unused material in spray equipment for more than 30 minutes.
- Cure: keep the surface moist for the first 48 hours.
How much do you need?
| Average thickness | Consumption | Area per 25 kg bag |
|---|---|---|
| 5 mm | 9 kg/m² | about 2.8 m² |
| 10 mm | 18 kg/m² | about 1.4 m² |
| 15 mm | 27 kg/m² | about 0.9 m² |
Example: levelling 10 m² of uneven blockwork at an average 10 mm with Coarse needs about 180 kg, so allow 8 bags.
Frequently asked questions
Which grade do I need?
Measure the depth of the repair: 5–15 mm needs Coarse, 3–5 mm Standard, and 1–3 mm Fine.
Is there a Standard grade for masonry and AAC?
Yes. Terramix Standard SP (2–12 mm) is listed for concrete, AAC and brick blockwork. See Terramix Standard SP.
Data sheet and related products
- Terramix repair mortar data sheet (PDF, Terraco UAE)
- Terramix Coarse and Standard product page
- All Terraco products we supply
Technical data from the Terraco UAE Terramix data sheet. Always check the latest data sheet before specifying.






Reviews
There are no reviews yet.