Terraco Terol Mineral Render

Mineral decorative render for facades and EIFS. Supplied by Al Tashteb Al Saree, authorised Terraco distributor in Sharjah and Dubai.

SKU: ATS-TER-H1360 Category:
Request a quote
Please enable JavaScript in your browser to complete this form.
Tell us the quantity needed, or the area to be covered.
Brand, size, colour or other details that help us prepare your quote.

Terraco Terol Mineral Render is Terraco’s mineral-based decorative render for long-life protection of exterior facades, mainly used as the finish coat on Terraco EIFS and on concrete, render and blockwork. It comes as a powder in 25 kg bags, in 16 standard colours. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terol from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.

Ask for price and stock on WhatsApp or call +971 52 510 4678.

What is Terol?

Terol is a coloured render made from crushed, graded inert extenders, special cements, limes and additives. You mix it with water and trowel or spray it on as a finished, textured surface in one operation. It resists weather and pollution, and Terraco gives an expected service life of more than 10 years when it is applied correctly. On EIFS it is usually topcoated with Terracoat Stain for extra dirt resistance.

Textures and coverage

TextureGrainCodeConsumptionArea per 25 kg bag
Granule (even granular)1 mm712173–4 kg/m²about 6.3–8.3 m²
Granule2 mm711334–5 kg/m²about 5–6.3 m²
Decor (scratch finish)2 mm711223–4 kg/m²about 6.3–8.3 m²
Decor3 mm71214listed as “7–5” kg/m²; confirm with us–
Sahara (filled granular)1 mm712153–4 kg/m²about 6.3–8.3 m²
Sahara2 mm712164–5 kg/m²about 5–6.3 m²
Coarse (spray or trowel)–711206–7 kg/m²about 3.6–4.2 m²
Smooth (spray, low build)–711102–3 kg/m²about 8.3–12.5 m²

Example: a 100 m² facade in Granule 1 mm needs about 300–400 kg, so allow 16 bags. Areas are our calculations from Terraco’s consumption figures.

Technical data

TypeMineral-based decorative render (powder)
Mixing water4.5–5.5 L per 25 kg (Coarse 5.0–5.5 L; Smooth 5.75–6.25 L)
CuringAir cure for 72 hours
Colours16 standard colours
Service lifeMore than 10 years when correctly applied (Terraco)
Packaging25 kg bags
Shelf life6 months unopened

How to apply

  1. Brush and scrape off dust, dirt and debris. The surface must be solid and free of salts, oil, grease and ridges. Protect adjacent surfaces.
  2. Repair surface defects with Terramix or Styrobond DP.
  3. Mix the powder with water: about 1 minute with a high-speed mixer or 5 minutes with a slow mixer.
  4. Trowel to a level granular finish. Don’t wet the trowel, as this can cause discolouration. Pattern Decor with a plastic trowel; spray Coarse and Smooth if preferred.
  5. Air cure for 72 hours. Clean tools with water.

Storage and safety

  • Store dry, away from direct sun and extreme heat or cold. Shelf life is 6 months unopened, so use the oldest stock first.
  • Cement- and lime-based: avoid prolonged skin and eye contact.

Frequently asked questions

Can Terol go on ordinary blockwork, not just EIFS?

Yes. Concrete, cement render, lightweight concrete and fair-faced brick or blockwork are listed, and it can be used inside too.

Which texture should I choose?

Granule gives an even granular finish, Sahara a filled granular look, Decor a scratch finish, and Coarse or Smooth a sprayed texture. Ask us for colour and texture samples.

Data sheet and related products

Technical data from the Terraco data sheet for Terol. Always check the latest data sheet before specifying.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top