Terraco Terol Granite Glitter Render is Terraco’s decorative mineral render with a glitter grain (code 71201), giving a granite-like sparkling finish on EIFS and masonry facades. It comes in 16 granite effects. Al Tashteb Al Saree is an authorised Terraco distributor, supplying Terol Granite Glitter from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is Terol Granite Glitter?
Terol Granite Glitter is a mineral render supplied as a powder. Applied 3–4 mm thick, steel-trowelled and then acid-washed, it exposes a decorative aggregate that looks like natural granite with a glitter. Terraco designed it for EIFS surfaces that need a glitter effect, and it also suits conventional masonry. Terraco lists low dirt pick-up, breathability, long life expectancy and superior weather resistance.
Technical data
| Type | Decorative mineral render with glitter grain (powder) |
| Product code | 71201 |
| Application thickness | 3–4 mm |
| Consumption | 4–8 kg/m² |
| Pot life | Use within 4 hours of mixing |
| Curing | Overnight, then acid wash |
| Colours | 16 granite effects |
| Packaging | 25 kg paper sacks |
| Shelf life | 12 months unopened |
How much do you need?
At 4–8 kg/m², one 25 kg sack covers about 3.1–6.3 m². Example: a 50 m² entrance facade needs about 200–400 kg, so allow 8–16 sacks, nearer the top on uneven surfaces. Based on Terraco’s consumption figure.
How to apply
- Make sure the surface is free of dust, salts, oil, grease and ridges, and protect adjacent surfaces.
- Repair surface defects with Terramix.
- Mix with water: about 3 minutes with a high-speed mixer or 15 minutes with a slow mixer. Stand 5 minutes, remix, and use within 4 hours. Keep the water content and mixing time the same for every batch so the colour stays consistent.
- Apply by trowel or spray at 3–4 mm, level with a steel trowel, let it set up, then float with a steel trowel for a smooth surface.
- Cure overnight. Saturate the surface with water, then apply a dilute hydrochloric acid wash to expose the aggregate. Repeat if needed and rinse off excess acid immediately.
- Clean tools with water.
Safety
- The acid wash uses dilute hydrochloric acid: wear gloves, goggles and protective clothing, protect glazing and metalwork, and rinse immediately.
- Store dry, away from sun and extreme temperatures. Shelf life is 12 months unopened.
Frequently asked questions
Why keep the water content the same?
Terraco advises consistent water and mixing times. Varying them between batches can change the final appearance across the wall.
Crystal or Granite Glitter?
Terol Crystal exposes glass aggregate for a crystal sparkle. Granite Glitter gives a granite-effect glitter in 16 effects.
Terol range compared
| Product | Aggregate | Consumption | Acid wash | Look |
|---|---|---|---|---|
| Terol Granite Glitter | Glitter grain, 3–4 mm layer | 4–8 kg/m² | Yes, after overnight cure | Granite-like with glitter |
| Terol Crystal | Glass, 2 mm | 4–5 kg/m² | Yes, 5% HCl after 24 h | Reflective, sparkling |
| Terol | Mineral, 1–3 mm grades | 2–7 kg/m² by texture | No | Granule, Sahara, Decor, Coarse, Smooth |
From the Terraco data sheets for each product.
Where it works best
Granite Glitter gives the look of natural granite without the weight or cost of stone cladding. It suits villa facades, entrance features, columns, boundary walls and commercial ground floors, and works as the finish on Terraco EIFS as well as on ordinary masonry. With 16 granite effects, it is easy to match stone elsewhere on a project.
Getting an even finish
- Use the same water content and mixing time for every batch; Terraco stresses this for colour consistency.
- Mix enough for a whole elevation section and use it within 4 hours.
- Finish at corners, joints or other natural breaks so day joints don’t show.
- Avoid direct midday sun and strong wind while applying.
- Do a sample panel, including the acid wash, for client approval.
Acid wash safety checklist
- Saturate the cured surface with water first, then apply dilute hydrochloric acid.
- Always add acid to water, never water to acid.
- Mask glazing, aluminium, metalwork and plants.
- Wear acid-resistant gloves, goggles and protective clothing.
- Rinse off excess acid immediately with plenty of clean water.
Data sheet and related products
- Terol Granite Glitter data sheet (PDF, Terraco UAE, 2017)
- Terol Granite Glitter product page
- Terol mineral render
- All Terraco products we supply
Technical data from the Terraco data sheet for Terol Granite Glitter. Always check the latest data sheet before specifying.






Reviews
There are no reviews yet.