Terraco P Primer Pigmented is Terraco’s pigmented surface consolidation primer that binds dusty, absorbent concrete and render and doubles as a white or tinted undercoat. The data sheet lists 5 kg and 20 kg containers. Al Tashteb Al Saree is an authorised Terraco distributor, supplying P Primer Pigmented from our shop in Bu-Tina, Sharjah, to Dubai, Sharjah, Ajman and the rest of the UAE.
Ask for price and stock on WhatsApp or call +971 52 510 4678.
What is P Primer Pigmented?
P Primer Pigmented is an aqueous acrylic copolymer primer that penetrates deep into cementitious materials, plasters and limes and binds them. Like the clear version, it improves adhesion, binds dusting substrates and reduces efflorescence and surface alkalinity. The difference is that it is pigmented: supplied white or tinted to match the finish colour, it evens out the colour of the wall so the textured coating or paint on top covers more consistently.
It is especially suited to sealing old, dry, absorbent, untreated concrete before textured coatings, paints and thin-layer mortars.
Where to use it
- Interior and exterior surfaces
- Sand/cement render
- Cast in-situ, precast and lightweight concrete
- Under textured coatings, paints and thin-layer mortars
Technical data
| Type | Aqueous acrylic copolymer emulsion, pigmented |
| Product codes | 68120, 68132, 68133, 68134 |
| Bases | White, Pastel, Mid and Clear base |
| Viscosity (23 °C) | 5,000 cps |
| pH | 8–8.5 |
| Specific gravity | 1.25 |
| Coverage | 0.15–0.20 kg/m² |
| Packaging (data sheet) | 5 kg and 20 kg containers |
| Shelf life | 12 months unopened |
How much do you need?
| Pack | Area per coat |
|---|---|
| 5 kg | about 25–33 m² |
| 20 kg | about 100–133 m² |
Example: priming 120 m² of facade needs about 18–24 kg per coat, so allow one 20 kg pack plus one 5 kg pack. Based on Terraco’s 0.15–0.20 kg/m².
How to apply
- Scrape and brush off dust, dirt and loose material. The surface must be free of salts, oil, grease and ridges.
- Protect adjacent surfaces, and repair cracks, chips and voids with a suitable Terraco repair compound.
- Stir until uniform.
- Apply liberally and evenly by brush or spray, and let it dry.
- Apply a further coat if the surface needs it.
- Apply the finish as soon as possible for the best adhesion. Clean tools with water.
Storage and safety
- Store in a clean, dry area away from direct sun and extreme heat or cold. Shelf life is 12 months unopened; use the oldest stock first.
- Avoid prolonged contact with skin and eyes, and see the safety data sheet for full details.
Frequently asked questions
Can it be tinted to my finish colour?
Yes. It is supplied white or tinted to match the finish. Tell us the finish colour when you order.
Clear or pigmented?
Use P Primer Clear when you only need to seal and bind. Choose pigmented when you also want an undercoat that evens out the colour.
Which Terraco primer do I need?
| Primer | Type | Coverage | Use it when |
|---|---|---|---|
| P Primer Pigmented | Pigmented consolidation primer | 0.15–0.20 kg/m² | You need to bind the surface and want a white or tinted undercoat |
| P Primer Clear | Clear consolidation primer | 0.08–0.10 kg/m² | You only need to seal and bind |
| Tex Primer | Pigmented primer with mechanical key | 8–10 m²/L | Under Terracoat and other trowelled textured coatings |
| Terrabond A | Acrylic bonding agent | By dilution | Under screeds and repair mortars, or as a mortar additive |
Choosing a base
| Base | Use it under |
|---|---|
| White | White and very light finishes |
| Pastel | Light tinted finishes |
| Mid | Medium-depth colours |
| Clear base | Deep colours, tinted close to the topcoat |
Tinting the primer close to the finish colour helps the topcoat cover evenly, especially with deep colours that would otherwise need extra coats.
Why use a pigmented primer?
Patch repairs, new and old render, and concrete all absorb differently and show different colours. A pigmented primer evens out both the absorbency and the colour of the wall, so the paint or texture on top dries evenly and doesn’t show the repairs through. On UAE facades, it also binds dusty, sun-weathered surfaces and reduces efflorescence.
Application tips
- Apply in the shade or the cooler part of the day.
- Do a rub test first: if the wall leaves powder on your hand, it needs consolidating.
- Overcoat as soon as it is dry for the best adhesion.
Data sheet and related products
- P Primer Pigmented data sheet (PDF, Terraco UAE)
- P Primer Pigmented product page
- Terracoat textured coatings
- All Terraco products we supply
Technical data from the Terraco data sheet for P Primer Pigmented. Always check the latest data sheet before specifying.






Reviews
There are no reviews yet.